VOLTRON Legendary Defender
Thank you for checking out my page! If you’d like to support my work, consider subscribing. As a member, you'll gain access to all my designs along with commercial rights to sell physical prints of them for as long as your subscription is active.
VOLTRON Defender of the Universe
Welcome to the new version of Voltron.
This is a fully transformable and poseable action-figure. Voltron is about 65cm tall.
The model shown was printed using Bambulab P1S and A1 printers BUT this model works with non multimaterial FDM printers from other brands as well.
All materials used are from Bambulab and are detailed in the instructions but you can of course use whatever brand you want.
Available Models: Shiro's Lion (BLACK) Keith's Lion (RED) Pidge's Lion (GREEN) Lances's Lion (BLUE) Hunk's Lion (YELLOW) Blazing Sword
You will have access to the .STL files and .3mf profiles for BambuStudio.
The model works with regular FDM printers and with Bambulab AMS Printers.
Disclaimer: the BambuStudio files are what I have used and it worked well for me. Feel free to change the settings to your preferences.
I have uploaded a .zip folder to “other files” since it is easier for me to manage the models and update the folder on the go.
Some of the parts need to be glued; and additional hardware is required for this model. Details can be found in the assembly instruction.
All parts will fit a 256 x 256 mm print-bed and are ready-to-print.
What does ready-to-print mean: This means, that all parts are oriented to be dropped into your slicer. Supports are not part of the model since everyone has its own preferences.
The following Bambulab filaments have been used:
Basic PLA Jade White (10100) Basic PLA Gray (10103) Basic PLA Bronze (10801) PLA Matte Lemon Yellow (11400) PLA Matte Charcoal (11101) PLA Matte Marine Blue (11600) PLA Matte Scarlet Red (11200) PLA Matte Grass Green (11500)
Please note: All my files are protected by a Creative Commons (CC) license and are strictly intended for non-commercial use unless you have subscribed to a membership plan on Thangs.
3D Printers used for this model: Bambulab A1 Bambulab P1S Bambulab X1C Filament used for this model: Bambulab PLA