Leia's Dual Extrusion Collapsing Lightsaber. It’s designed to be a dual extrusion print with no supports. No assembly required, besides inserting the blades and screwing on the caps. The blades can be printed together or separately in vase mode, which is my recommendation. It’s designed to be printed with a ,4mm nozzle, with a line thickness of .43, so the blade will be two shells thick. The test print can be found [here.](https://thangs.com/3dprintingworld/SwordSaber-Test-Print-23601) I also included a single extrusion version. Printed on the [Mudlex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer. **Collapsing Lightsabers** [ROTJ Single Extrusion]( https://thangs.com/3dprintingworld/Collapsing-LightsaberPNP-23596) [ROTJ Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Lightsaber-Dual-Extrusion--34803) [Vader’s Single Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-23598) [Vader’s Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-dual-extrusion-28319) ___ **Support and Licensing** If you would like to help support more free models, or gain permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)