If you are a true beach lover, these anchors are a must-have!

Fed up with having to straighten your towel every time you get up, particularly on windy days? That suffering will finally come to an end!

Bury the anchor in the sand, tighten the spring on your towel and you'll no longer have to hold your towel with flip-flops, because the anchor will hold it and keep it stuck to the sand!

**Quick tip**: Make sure the X-Y contour tolerances compensation are tuned in the model for your printer / filament.

Just choose one of the different shapes and print away.

**Happy prints!**

Smile XD - Beach Towel Anchor - Print in Place

Smile 3 - Beach Towel Grabber.3mf

Happy Smile :) - Beach Towel Anchor - Print in Place

Smile 2 - Beach Towel Grabber.3mf

Smile :S - Beach Towel Anchor - Print in Place

Smile 1 - Beach Towel Grabber.3mf

Shark- Beach Towel Anchor - Print in Place

Shark - Beach Towel Grabber.3mf

Piranha - Beach Towel Anchor - Print in Place

Piranha - Beach Towel Grabber.3mf

Crocodile - Beach Towel Anchor - Print in Place

Croc - Beach Towel Grabber.3mf

These anchors are a must-have for anyone who loves picnics and outdoor activities!

Tired of having to straighten your towel every time you get up, particularly on windy days? That torment will finally be over!

Bury the anchor in the grass, fit the mouth of the figure into your towel. These anchors will now hold the towel for you and keep it stuck to the ground!

**Quick tip:** Make sure the X-Y contour tolerances compensation are tuned in the model for your printer / filament.

Just choose one of the different shapes and print away.

**Happy prints!**

Smile XD - Picnic Blanket Anchors - Print in Place

Smile 3 - Grass Towel Grabber.3mf

Happy Smile - Picnic Blanket Anchors - Print in Place

Smile 2 - Grass Towel Grabber.3mf

Smile 1 - Picnic Blanket Anchors - Print in place

Smile 1 - Grass Towel Grabber.3mf

Shark - Picnic Blanket Anchors - Print in Place

Shark - Grass Towel Grabber.3mf

Piranha - Picnic Blanket Anchors - Print in Place

Piranha - Grass Towel Grabber.3mf

Crocodile Picnic Blanket Anchors - Print in Place

Croc - Grass Towel Grabber.3mf

Picnic Blanket Anchors - Print in Place

**Customizable **Spinning Wheel / Roulette for you to write whatever you want in every section according to your needs!

Great for board games and drinking games (as the one in the pictures)

**Improved on V2, now with no need for any glue and adjustable freedom of pointer rotation! 
**
Assembly instructions:

_1) Edit the text on each section according to what you want through your slicer;
2) When printing be sure to give some hole dimension compensations to be sure that pointer can rotate freely;
3) Spread glue in the wheel hole, align the pointer and insert the pin in the hole until you are sure it's glue together;
4) Enjoy your game!_

Customizable  Spinning Wheel

Spinning Wheel.3mf

Undecided about which picture to frame? 

Never again! Here is a dynamic dual instax/fujifilm picture holder that rotates smoothly displaying both the pictures you prefer.

**Video of the moving frame available. Go ahead and check it!**

Check the Ring frame design too!

_Ps: You should only glue the connector to the base. The rest must rest free._

Instax Picture Rotating Square Frame

ALL.3mf

Undecided about which picture to frame? 

Never again! Here is a dynamic dual instax/fujifilm picture holder that rotates smoothly displaying both the pictures you prefer.

**Video of the moving frame available. Go ahead and check it!**

Check the Square frame design too!

_Ps: You should only glue the connector to the base. The rest must rest free._

Instax Picture Rotating Ring Frame

Simple lid clip to tighten your container / box.

Simple Lid Clip

Simple lid Clip_V2.3mf

A support for your hydrometer that attaches to a vertical wall inside your box / container and does not obstruct the humidity sensors.

Hydrometer Holder 

Holder_Hidrometro.3mf

A spacer to put in between 2 spools to reduce attrition and ease rotation

Spool Spacer

Spool_Spacer.3mf

Very sturdy Bar / Rod hanger to give support to hanging spools.

Tested for multiple months with up to 6 kg and no issues found.

Sturdy Rod / Bar Hanger V2.0

Hanger_V2.3mf

Hanger_V1.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3Doodling

Achievements

Novice Maker

Seedling

Trailblazer