tracking pixel
Vince S

Fire EMS Spinner

by
3Dmedic.vince
Follow
Follow
Remix Model
3Dmedic.vince
3Dmedic.vince
Image 1 of 2
Fire EMS Spinner 3d model
3Dmedic.vince
3Dmedic.vince
Image 1 of 2
Fire EMS Spinner 3d model
2D
3D
Makes
Fire EMS Spinner 3d model
Fire EMS Spinner 3d model
5 Likes5 DownloadsFebruary 16, 2023


Being a firefighter paramedic I thought I would offer up a Fire EMS spinner. you can print with layer height of 0.20mm from 0-1.40mm then 0.10mm layer height from 1.4mm-4.6mm then finish with a layer height of 0.2mm from 4.6mm-6mm. This will allow it to spin smoother. As is, it will print with top and bottom layers for both inner and outer pieces but if you select the inner star, you can do no top and bottom layers and use a gyroid infill to have a cool effect.


5 Likes5 DownloadsFebruary 16, 2023




5 Likes5 DownloadsFebruary 16, 2023