tracking pixel
Erin B

Squishy Mushrooms (2 sizes)

by
3DPmom
Follow
Follow
Remix Model
3DPmom
3DPmom
|
Image 1 of 11
Squishy Mushrooms (2 sizes) 3d model
3DPmom
3DPmom
|
Image 1 of 11
Squishy Mushrooms (2 sizes) 3d model
2D
3D
Makes
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
Squishy Mushrooms (2 sizes) 3d model
This model is restricted by licensing terms. 

These Squishy Mushrooms came to life while I was designing my Fidget Garden. After some brief research and consulting with my family, it was decided mushrooms were not a traditional garden vegetable so they were voted out of the planter box BUT they were too cute not to finish and upload separately 🍄

They come in two sizes and each prints in two parts: a cap and a spring stem.

Dimensions of Small Mushroom (assembled): 1 ⅞ in. X 1 ¾ in. Dimensions of Large Mushroom (assembled): 2 ¼ in x 1 ⅞ in

PLA works great Layer Height 0.2mm Infill 10-15% No supports needed

If you would like to print the mushroom caps as a multi-color print, I included a comparison photo of the flushing volumes I tried in an attempt to minimize purge waste:) I found that a multiplier of 0.3 worked well 🙌🏼

If you like my work and want to help support it, you can buy me a Diet Coke at https://www.buymeacoffee.com/3dpmom Thanks so much!

Have fun printing!!


98 Likes281 DownloadsMay 27, 2024


98 Likes281 DownloadsMay 27, 2024
This model is restricted by licensing terms.