Pumpkin & Jack O'Latern Layered Fidget (3 Styles in 3 Sizes = 9 total)

These pumpkin fidgets are always a big hit at halloween 🎃 They come in three styles: small, large and tall - and each style comes with an embossed face, a cut-out face or no face.

Dimensions of Small Pumpkins: 2 in. x 1 ⅛ in. Dimensions of Tall Pumpkins: 1.75 in x 2 in. Dimensions of Large Pumpkins: 3 in. x 1.5in.

3D PRINTING SETTINGS: Layer Height 0.2mm PLA works great 15% Infill Supports needed for the pumpkins with the cut-out faces

If you would like to make these a multi-color print but don't have a multi-color printer you can insert a pause print to change the filament color as follows: For the Small Pumpkin: pause at layer 141 (layer height 28.2) For the Large Pumpkin: pause at layer 201 (layer height 40.2) For the Tall Pumpkin: pause at layer 226 (layer height 45.2)

Notes: For some machines (like a Prusa) I recommend that you turn on the “Detect thin walls” setting (in Prusaslicer go to > Print Settings >Layers and Perimeters > check the box 'Detect Thin Walls). This will ensure that all the vertical lines on the pumpkins print out well. On my Bambu printer I did not need to do this.

I am also attaching a 3mf file with the following print profiles: Print plate #1: Small Pumpkin (face_no supports needed); 2 colors, orange & green Print plate #2: Small Pumpkin (face cut-out_supports needed); 2 colors, orange & green and supports added Print plate #3: Small Pumpkin (no face); 2 colors, orange & green Print plate #4: Lg. Pumpkin (face_no supports needed); 2 colors, orange & green Print plate #5: Lg. Pumpkin (face cut-out_supports needed); 2 colors, orange & green and supports added Print plate #6: Lg. Pumpkin (no face); 2 colors, orange & green Print plate #7: Tall Pumpkin (face_no supports needed); 2 colors, orange & green Print plate #8: Tall Pumpkin (face cut-out_supports needed); 2 colors, orange & green and supports added Print plate #9: Tall Pumpkin (no face); 2 colors, orange & green

Have fun printing!