Hi folks!
This is the Tower Of Doom Dice Tower!
I am super happy with how this turned out and although I'm not really into D&D, this looks so cool I'm placing it on one of my main display shelfs 🙂
The model:
The model you see here was printed without an AMS - All parts are printed separately and easily assembled to save you the waste, time and support material printing this in one piece would make - But if you prefer there are multiple versions to pick from:
Tower - With / Without the Skull + With Spikes built in / Spikes printed separately
Base - With Fence / Without fence
Skull - With led holes / Without led holes
Cover - 2 hole sizes
Fence - Print 24 pieces if you print it separately, push them inside the holes - Drop of glue is required so they stay in.
Skull - Drop of glue to place it above the designated gate area.
Make sure you pick the correct tower and base 🙂
If anyone want's a 1 File Print - let me know in the comments and I'll upload it tomorrow.
Using Leds:
The Skull version can be printed with holes for leds - You can push the wires through a hole beneath the tower and place a battery there. You can also light the entire thing by pushing a led strip inside along the left wall. Leds are of course optional.
** The current version will not handle massive Dice sizes like 2.8mm - But I will release another version tomorrow to handle this - TBH not sure if anyone is using those. **
Scaling up/down:
Down - not recommended - will work but will reduce the space for dice to fall through it Up - Should not be a problem.
Supports:
Use manual/custom supports for the top part of the gate ONLY. Do NOT use supports for the entire tower! Skull may look better if you align it vertically.