Valentine’s Day is almost here, and I figured I’d sneak in one more Bad Guy — since you all showed so much love for Bad Teddy. Meet Bad Penguin. Same attitude, same concept… just colder 😅

Printing

• The penguin body needs supports — use organic/tree supports.
• The Penguin_Front part definitely needs supports, and I strongly recommend adding a brim. The contact area is very small, so add a few custom supports underneath to help it stay stable and stick well during the first layers.
• The heart requires a few small supports as well.
• To color the feet, do a filament/color change at the right layer (with 0.2 layer height it’s around layer 35, but it doesn’t need to be exact).

Assembly

• You have three eye options: Black / Multicolor / Multipart.
• The eyes are designed to rotate inside the sockets, so you can adjust their direction after inserting them.
• If they’re too tight, scale the eyes down by 1% and try again.
• The front part and the beak need to be glued in place.

If anyone wants a full multicolor version please let me know.