This is the Grinch Hand wall mount / Decoration for Christmas, besides the deco function it can also be a pretty cool looking hanger for keys or what not 🗝️
First of all a heads up - Default size is pretty big! The images here are at 75%. if you print it at 100% you are getting a pretty big life size hand (+)
So I think the best size might be 70%-80% scale.
It is printed in 3 parts, no supports so you can color it however you want without a multicolor printer!
Each part snaps into the other - you only need a little bit of glue on top of the red sleeve and bottom + upper side of the hand - But really just a little bit to hold them together.
** Hand_With_Hole.stl is the same file it just has a tiny hole between the fingers so that if you want to hang an ornament it will look as if it's holding it between the 2 fingers.
Scales:
I printed it at 20% + 50% + 75% no issues everything connects together nicely
Also added single 3MF and STL file if you want to printed in one piece - You will need supports for this, also the size is scaled to 75%.