tracking pixel
Michael T

Bad Avocado

by
3DGeex
Follow
Follow
Remix Model
3DGeex
3DGeex
|
Image 5 of 11
Bad Avocado 3d model
3DGeex
3DGeex
|
Image 5 of 11
Bad Avocado 3d model
2D
3D
Makes
Bad Avocado 3d model
Bad Avocado 3d model
Bad Avocado 3d model
Bad Avocado 3d model
Bad Avocado 3d model
Bad Avocado 3d model
Bad Avocado 3d model
Bad Avocado 3d model
Bad Avocado 3d model
Bad Avocado 3d model
Bad Avocado - My make
https://kady3dprinting.com/model/3d-printed-bad-avocado - 3d model

Hi folks!

Hope you like this little guy and his surprise.

This dude is printed without AMS so all the colors here are achieved with a single color printer.

I will also add a "non collapsing" version with the hands being fixed and still, it will have a less surprising effect but nicer esthetics as there will be no holes for the hands. I will probably add it tomorrow.

Printing:

Print the Avocado back with supports where required.

Print the Front with supports but block supports on the entire hands area - No supports there!

Print the eyes with your bambu AMS - or pause and switch colors at the last 2 layers.

Print the skin with supports for the inside part.

All parts must be glues together (Super easy and a no brainer)

Tested sizes: 90% & 100%

Update:

The following contains these additional files:

Keychain skin - Just print it and you have an avocado keychain

Clean Avocado without the naughty gesture 🥑

Fixed hands version that includes hands and new front + back versions - This is more suitable for the keychain as the mechanism will probably not work at such a small scale.

the scale of all files is the same as before - If you want to print keychains scale it down to 50%-60% and print the Skin_Keychain.

of course you can also print it at the original size!


115 Likes152 DownloadsJuly 31, 2024