I designed a Thor hammer where you can put 36 switch games in one side and the other side you can put the switch and controllers. The handle is in 2 pieces that screw together so you can always take it apart when transporting so it takes less place. The side pieces close with magnets of 8mm by 2mm that fit in every corner. The body i made in 2 pieces so it can be printed with less supports and made slots in it so it is easier to put in place. 3D printing settings i printed mine with a 0.4mm nozzle, 0.2mm layer height and 10% infill. If you like to sell the prints then join my membership plan.