Print in place with no support and no assembly required. Just slice and print!
If printed at 100% can fit 3 100% Tiny's prints. Comes with the top right side up or upside down.
To legally sell the printed models, you can get my permission by joining our community on Thangs.
NOZZLE: 0,4 mm. LAYER: 0.16 – 0.20 OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO Z-HOP: 0.8 BRIM: If necessary
Category:
1 Likes0 DownloadsJuly 22, 2024