This is a first of many lamps inspired by a various number of minerals and crystal.
The Quartz fits your average printer at 246mm tall. Total dimensions 100mm x 116mm x 246mm
Print instructions (very important!): Infill: 90% for weight on base Nozzle: 0.4mm Layer height: 0.16-0.2mm Wall Count: 2 Wall Speed: 70mm/s (tested at 150mm/s but quality slightly decrease) Infill: You can use any infill but recommend 50-75% for added weight on the base. Part cooling fan: 100% Auxiliary Fan (side fan on enclosed printers): 100% (Default is set to 70%) Bed Adhesion: Use a PIE Plate for best results in my opinion
Filament used in picture: Ziro Gradient PLA - Winter (https://amzn.to/4cYd2Xa) Uses BambuLab LED Light Kit - https://store.bambulab.com/products/led-lamp-kit-001
Includes STL, STEP, Colored 3MF and Fusion360 files.
Commercial Licensing available through my Thangs Memberships, starting at $10/mo
Use Promo code WELCOME50 for 50% off your first 2 months!
All Free & Maker Plan Models are under CC BY-NC-ND License Commercial Plans are under CC BY-ND License