I really enjoyed creating this one. I started off with the intention of making a greyscale print but the temptation to splash it with a sunset palette really paid off. Being a 233 x 233, x 4.5mm deep print and using 9 different filaments, you're looking at 9+ hours printing time and some patience required if you're manually swapping filament, but this is a really nice print and worth the effort.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.48mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Cement Gray Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Light Gray Transmission Distance: 0.7 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Charcoal Black At layer #15 (1.28mm) swap to Cement Gray At layer #17 (1.44mm) swap to Grey At layer #20 (1.68mm) swap to Light Gray At layer #26 (2.16mm) swap to Orange At layer #31 (2.56mm) swap to Yellow At layer #36 (2.96mm) swap to Beige At layer #44 (3.6mm) swap to Jade White for the rest.

Frame not included.