I admit, this takes a few different filaments (13) but if you have the filaments and the patience the end result is well worth the journey. This print looks fabulous on the wall.

For a more economic, sepia look, you can reduce the number of filaments to 7. Simply skip the green, brown, orange, red, yellow and bone white (not pictured).

This print uses 13 unique filaments Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 233x233mm in size. The Max Depth is 5mm and the Actual Depth is 5mm.

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA Overture Cement Gray Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #16 (1.44mm) swap to Charcoal Black At layer #18 (1.52mm) swap to Green At layer #20 (1.68mm) swap to Cement Gray At layer #23 (1.92mm) swap to Brown At layer #24 (2mm) swap to Orange At layer #25 (2.08mm) swap to Grey At layer #27 (2.24mm) swap to Light Gray At layer #28 (2.32mm) swap to Red At layer #29 (2.4mm) swap to Orange At layer #30 (2.48mm) swap to Yellow At layer #32 (2.64mm) swap to Latte Brown At layer #39 (3.2mm) swap to Bone White At layer #44 (3.6mm) swap to Jade White for the rest.

Frame not included.