This prints to a depth of 4.6mm, using 6 different colours and is a captivating piece of artwork up on the wall.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 233x233mm in size. Frame not included.

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA Overture Light Gray Transmission Distance: 0.7 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Charcoal Black At layer #17 (1.44mm) swap to Red At layer #26 (2.16mm) swap to Light Gray At layer #32 (2.64mm) swap to Bone White At layer #44 (3.6mm) swap to Jade White for the rest.