The 3MF file has the swaps already loaded and also includes a modifier which slows down the first 11 layers to achieve a nice uniform background. It adds some time to the print, so if that is an issue for you, just delete the modifier or use the attached STL file instead. To further reduce printing time, you can reduce Wall Loops to zero, which shaves a whopping 4 hours. This particular print (pictured), was created using zero wall loops.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 233x233mm in size. The Depth is 5mm. This print uses 9 unique filaments

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA Overture Cement Gray Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #21 (1.76mm) swap to Charcoal Black At layer #23 (1.92mm) swap to Green At layer #27 (2.24mm) swap to Cement Gray At layer #31 (2.56mm) swap to Grey At layer #33 (2.72mm) swap to Light Gray At layer #43 (3.52mm) swap to Orange At layer #44 (3.6mm) swap to Bone White At layer #53 (4.32mm) swap to Jade White for the rest.

Frame not included.