Diesel Punk Rottweiler. This artwork took some time to get right but it came out great in the end!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA Overture Black Transmission Distance: 0.7 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Cement Gray Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Light Gray Transmission Distance: 0.7 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Charcoal Black At layer #11 (0.96mm) swap to Cement Gray At layer #13 (1.12mm) swap to Grey At layer #14 (1.2mm) swap to Light Gray At layer #18 (1.52mm) swap to Bone White At layer #25 (2.08mm) swap to Orange At layer #29 (2.4mm) swap to Jade White for the rest.

Frame not included.