This fun print is Derek the Dachshund, created in rainbow colours. It uses 7 colours. Frame not included.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The model is 233x233mm in size. The depth is 5mm (just over 4mm blending height).
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ Esun Dark Blue Transmission Distance: 2 PLA BambuLab Basic Cyan Transmission Distance: 1.9 PLA BambuLab Basic Magenta Transmission Distance: 3.4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Esun Pine Green Transmission Distance: 1.2
Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Dark Blue At layer #15 (1.28mm) swap to Cyan At layer #20 (1.68mm) swap to Magenta At layer #29 (2.4mm) swap to Black At layer #32 (2.64mm) swap to Red At layer #36 (2.96mm) swap to Yellow At layer #46 (3.76mm) swap to Pine Green At layer #52 (4.24mm) swap to Yellow for the rest.