This is Bully the Pitbull.
The 3MF file has the swaps already loaded if you're using Bambu Studio, and also includes a modifier for the first 11 layers which helps achieve a smooth looking and uniform black background. Adds time, so delete it if that's an issue for you or just use the STL file instead.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. This print is 233x233mm in size. You may print at higher layer heights below the Min Depth of 0.96mm. The Max Depth is 5mm and the Actual Depth is 5mm.
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA Overture Cement Gray Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #20 (1.68mm) swap to Charcoal Black At layer #23 (1.92mm) swap to Brown At layer #25 (2.08mm) swap to Cement Gray At layer #27 (2.24mm) swap to Orange At layer #31 (2.56mm) swap to Bone White At layer #35 (2.88mm) swap to Jade White for the rest.
Frame not included.