An ergonomic custom grip for bike handles with 21-22mm diameter. The Grip itself got an outer diameter of 33-35mm. PLease check if this is suitable for you. 
Use TPU to print it. 15% infill is sufficient with 3 walls. No ironing, no support. 

Ergonomic custom bike handle grip 

Fahrradgriff V2 Dicker.stl

A 45 Degree foregrip for 20mm picatinny/weaver rails at airsoft or paintball rifles. 
Print it with shaft vertically, with support. 
You will need a M4x40 screw and M4 nut or similar size in imperial units. 

foregrip_45 04-2024 v15.stl

Get the dimpled and ribbed front grip for paintball or airsoft that fits perfectly on 20mm Picatinny & Weaver rails.

Our unique and proprietary design makes this grip an outstanding choice.

Thanks to the surface structure, you not only enjoy maximum comfort, it also prevents slipping during the game.

The grip is simply slid onto the rail and fixed with the supplied screw - done!

Our grip is a lightweight with a unique design that gives you optimum performance.


Vertical Grip Foregrip Paintball Airsoft Milsim

Vertikaler Griff einfach v3.3mf

Paintball and Airsoft Front Grip Foregrip with bump structure for better handling.
Print upside down with support. The support is needed for the rail connection, not for the bumps. So you  need just a bit support at the lowest two centimeters of the model.
The grip is hollowed but strong with one outer 3 wall perimeter and one inner 3 wall perimeter. 
Its works for 20mm picatinny/weaver rails (standard for most milsim-paintball or airsoft rifles).

**You will need 1 screw M4x35 and one nut M4 or similar size in imperial to fixate the foregrip at the rail to avoid sliding to the front and back. **

3 walls, 25% support, layer height according to your wish for details. I use 0.1 to 0.15 layer height. 

Paintball Airsoft Front Grip with bump structure

Sticky McStock V2 Lang Nipple.step

An other version of my short foregrip, this time with round slots for the fingers. 
As with most of my grips you will need a M4x35 screw and M4 nut (or imperial substitute) to connect it to the picatinny rail. 

Short flat foregrip round fingerrest.step

Shorty flat foregrip round fingerrest.step

A slim foregrip for Paintball in a milsim / Woodland / magfed setting. 
You will need a M4x35 screw and a M4 nut or similar size to fix it at the rail against sliding. It fits picatinny rails which are used at most milsim/woodland/magfed markers.

Enjoy. 

Shorty flat foregrip V2 Paintball Gotcha Airsoft 

Shorty flat foregrip v5.stl

A Paintball / Gotcha foregrip with an crusader shield emblem. You will need the colors red, white and black, if you want a black grip ;-) 
It works for picatinny rails, which are used at almost all magfed/Woodland paintball markers. 
Print the cross 2 times. 

You will need 1 Screw M4x35 and 1 nut M4 to fixate it at the rail. Thats a few cents in the home depot / construction supply market. 

**ATTENTION:** You have to split the STL of the main body in Prusa or any other slicer with that ability and add sockets ! Without splitting it you will not be able to insert the shields and crosses.
I added a GCODE file but i dont know if this works with your printer. Maybe open it in your Slicer for a preview. 

Grip Foregrip Paintball Gotcha Magfed Crusader Shield Emblem

Griff Ergo am Stueck.stl

Kreuz rot.stl

A stylish and functional front grip for your paintball marker ! 
Fitting to picatinny rails (standard rail at most magfed markers). 

You will need 1 M4x35 screw and 1 M4 nut to ficate the grip at your marker. 
Those are purchaseable for a few cents in a construction supply market. 

My own design.

Ergonomic Front grip paintball gotcha woodland milsim magfed

Ergo Voronoi.stl

A stylish and functional top grip for your paintball marker ! 
Fitting to picatinny rails (standard rail at most magfed markers). 
It will add 50mm in height (raiser).

You will need 1 M4x35 screw and 1 M4 nut to ficate the grip at your marker. 
Those are purchaseable for a few cents in a construction supply market. 

My own design.

Top Rail and Raiser Paintball Magfed Milsim Woodland Gotcha

Handgriff Top Rail 2023.stl

A stylish front grip for your paintball marker ! 
Fitting to picatinny rails (standard rail at most magfed markers). 
Brutal PDW Style !

You will need 1 M4x35 screw and 1 M4 nut to ficate the grip at your marker. 
Those are purchaseable for a few cents in a construction supply market. 

My own design.

PDW Style Grip Foregrip Paintball Gotcha Rail 

PDW Powersaw kantig mit Lücke groß.stl

A new stylish front piece for your EMF100 paintball marker ! With elongated rail.
Just detach your front piece and first barrel part and you can clip this one to the EMF100. 

Silencer/muzzle break have no real function besides the modification of looks. 

No Screws needed !
Keep in mind this model only works with the EMF100 EMEK from Planet Eclipse

My own design.

Front piece with muzzle silencer EMF100 Planet Eclipse

Front piece with muzzle 1.stl

An ergonomic 45° front grip for all paintball fans out there. Fitting to picatinny rails
Lightweight, comfortable, badass look. 

You will need a M4x35 screw and M4 nut to fixate it at the rail. Those cost a few cent in a market for construction supplies. 
Designed by myself.

Front grip ergonomic 45degree Paintball Gotcha Woodland Milsim

Griff Ergo 45Grad.stl

A 45° raiser/adapter for all paintball fans out there. Fitting to picatinny rails
You can, for example  add a second sight or a flashlight with this adapter. 

You will need a M4x35 screw and M4 nut to fixate it at the rail. Those cost a few cent in a market for construction supplies. 
Designed by myself.

45° degree Raiser adapter Paintball Gotch Milsim Picatinny 

45er Raiser.stl

A handgrip and raiser for all paintball fans out there.  It works as a 50mm raiser too. 
Stable and comfortable. Fitting to picatinny rails

You will need a M4x35 screw and M4 nut to fixate it at the rail. Those cost a few cent in a market for construction supplies. 
Designed by myself.

Bee63 Top Grip Picatinny Woodland Milsim Paintball Gotcha Rail Raiser

Bee63 Top Grip Picatinny.stl

You get to download 3 Models for just 10$. Thats a full modification set of foregrip, front piece and top grip for 10 bucks. 

Base Paintball Enthusiast

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

1337-Gripz

Select a membership plan