The first automatic triple dispenser tile.
The first ball flips the mechanism and temporarily acts as a counterweight, setting the flipper to the loaded position. After another two balls are rolled in, the flipper resets to the primed position, releasing all three, and the cycle repeats. When played, players have a choice of setting the mechanism. Set it into the loaded position and it makes the initial ball a single passthrough. Or set it into the primed position and it's ready for three balls. The first ball in the cycle also serves as a speed check if the flipper is in the primed position. If it's slow, It won't flip the mechanism but rather route down to the exit. This tile is designed for 10mm balls but also works with 3/8".
Hardware is an M3x12 screw with two M3 washers in between the base and flipper.
This tile is part of my Counterweight Tiles Pack. Check the others out. AltWave https://thangs.com/m/1031259 Overdrive Wave https://thangs.com/m/1031248 Wave https://thangs.com/m/1031247 Twozu https://thangs.com/m/975596
Now it's also part of my Disaster Tiles Pack. Check these out too. Cyclone https://thangs.com/m/1069584 Earthquake https://thangs.com/m/1069585 Noah's Ark https://thangs.com/m/1069587 Nuclear https://thangs.com/m/1069592 Trapdoor Sinkhole https://thangs.com/m/1069609 Solar Flare https://thangs.com/m/1069626 Volcano https://thangs.com/m/1069633