A reverse flip-flop doubler dispenser.

When empty, it acts like Zack's Turnstyle. By trapping a ball in the counterweight pocket, it becomes loaded. Converting into a doubler dispenser that alternates between the upper left and right openings every release. Be careful with this one when loaded. Unlike the Turnstyle, it prohibits queuing a ball due to the 3-ball rule. This tile is designed for 10mm balls but also works with 3/8".

The Pivot hardware is an M3x12 screw with two M3 washers in between the base and flipper. It's screwed in from the top. The rotation lock hardware is an M2x12 screw, but any length between 4mm and 13mm works fine. You can use a 13mm+ length, but it protrudes past the flipper. It's screwed in from the bottom.

This tile is part of my "Counterweight Tiles Pack". Check the others out. Overdrive Wave https://thangs.com/3d-model/1031248 Wave https://thangs.com/3d-model/1031247 Tsunami https://thangs.com/3d-model/1031250 Twozu https://thangs.com/3d-model/975596