Drybox turntable filament dispenser

Offset Post-3.stl

PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints

Top Plate.stl

MODULAR SPOOL STAND

4x WHEEL.3mf

Dry box humidity/temprature sensor mount for Tuya sensor with screen

tuya mount.stl

PSU MOUNT.3mf

Modular Spool Holder (1kg Space Saver)

Centre_1ofeach.3mf

Hinges

LEFT.3mf

Power Switch Panel

Back.3mf

No-Drill, Print From, 100% Dry Box Mod

Spool Mount V2.stl

Filament Compression Fitting.3mf

Compression Fitting.3mf

Cereal Bin Dry Box

Base v2.4.stl

Prusa enclosure filament guide mount

prusa 3dprinter enclosure tube mount v3.3mf

Bowden Tube Holder for K1

This is a press fit bowden tube holder for the Creality K1. If you connect a dry box or just want to guide the filament using a bowden tube, this will hold the tube in place.

Tolerances are important for it to press fit into the honeycomb.

Note - Print it vertical for maximum strength. No supports needed for printing but if you feel just add a brim for adhesion.

FY-11 Digital Humidity /Temp. meter front mount

FY-11 is a Digital Humidity and Temperature panel meter. It is compact and cheap. Great to use inside dry boxes.

This is a mount for the FY-11 meter to be installed inside of a transparent enclosure.

Press-fit the meter in the mount and install with double sided sticky tape.

FY-11 Digital Humidity /Temp. meter mount

Bowden tube caps for Dry boxes

BowdenCap.stl

PC4-M6 Threaded Cap

I wanted to build a dry box but spend less time printing the interfaces... One of the solutions I put together was to use a PC4-M6 attached to a small section of TPFE tube and this cap to seal the end. Of course this is a waste of a PC4-M6 and so a temporary solution if you have a proper bowden setup. But if like me, you had these to spare, it does work a charm until I decide on/design/print a better solution.

Minimalist Spool Buffer

I keep my hygroscopic filaments in dryboxes.  Which works great, but  creates a problem when I unload the filament and need to rewind it into the box.  

Buffers take up too much space to fit easily into 22L SAMLA boxes.   Then I found Dombi3D's buffer for spools, but it worked with bottom berring feeders.   

I designed mine to fit 200mm (1kg) spools, and 4mm wood rods.  

You can customize it with the link to OnShape, as most of the model is parametric.   Change for your size spool or “rod”.  I just used wooden BBQ squewers. 

Fit's nicely  on medium sized printers (ie Ender3) 

Printed in PLA, infill doesn't matter.

Drybox

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Drybox turntable filament dispenser

PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints

MODULAR SPOOL STAND

Dry box humidity/temprature sensor mount for Tuya sensor with screen

PSU MOUNT.3mf

Modular Spool Holder (1kg Space Saver)

Hinges

Power Switch Panel

View 12 new models

Filament Compression Fitting.3mf

Cereal Bin Dry Box

Prusa enclosure filament guide mount

Bowden Tube Holder for K1

FY-11 Digital Humidity /Temp. meter front mount

Bowden tube caps for Dry boxes

PC4-M6 Threaded Cap

Minimalist Spool Buffer

Measuring Jig for Mihai's Drybox Window Panels

View 15 new models

Ikea365+ Drybox 10.6L