Monitor side hook (sturdy)

MonitorHook - Base.stl

Dual desktray

Desktray-1.stl

Simple Modern Vase

Vase1-Sprial.stl

Door Catch

DoorCatch - Female.stl

Logitech keyboard MK275 foot

Logitech - MK275-Feet.stl

Desktop Tray (Vase Mode)

Desktop - Tray.stl

Penstand (Vase mode)

Penstand1.stl

Doll House (Vase mode)

DollHouse - Part 1.stl

Wall Clamp

WallClamp - Clamp.stl

Voronoi Sphere (Ball)

Voroni-Sphere-2.stl

Double Hook

DoubleHook - Hook.stl

Bowden Tube Holder for K1

This is a press fit bowden tube holder for the Creality K1. If you connect a dry box or just want to guide the filament using a bowden tube, this will hold the tube in place.

Tolerances are important for it to press fit into the honeycomb.

Note - Print it vertical for maximum strength. No supports needed for printing but if you feel just add a brim for adhesion.

WD40 Straw Clip

A very frustrating thing of WD40 smaller packs is that it doesn't have a proper holder for the straw they give along with. At least in my country. It's easy to misplace or simply lose.

So just designed this one make life a little less frustrating :D

FY-11 Digital Humidity /Temp. meter magnet mount

FY-11 is a Digital Humidity and Temperature panel meter. It is compact and cheap. Can be used anywhere. 

It's designed as a panel meter. So mounting is a bit challenging. To solve the problem I designed this magnetic mount which uses 6x3mm neodymium magnets or can be even be screw mounted after clearing the sacrificial layer of 0.2mm.

Material - Any
Layer height - 0.2

FY-11 Digital Humidity /Temp. meter front mount

FY-11 is a Digital Humidity and Temperature panel meter. It is compact and cheap. Great to use inside dry boxes.

This is a mount for the FY-11 meter to be installed inside of a transparent enclosure.

Press-fit the meter in the mount and install with double sided sticky tape.

FY-11 Digital Humidity /Temp. meter mount

Bowden tube connector (4mm)

A simple bowden tube (4mm)  connector for joining two loose ends.

Bowden tube caps for Dry boxes

BowdenCap.stl

Creality K1 Extruder motor heat shield with air vents

K1 - ExtruderHeatShieldVented.stl

Creality K1 Extruder motor heat shield

K1 - ExtruderHeatSheild.stl

Creality K1 Bowden tube combo clip (Side mounting)

K1-BowdenClip-ChainCombo.stl

Creality K1 Bowden tube clip (Side mounting)

K1-BowdenClip - ChainSide.stl

Creality K1 Bowden tube clip (Top mounting)

K1-BowdenClip-ChainTop.stl

Bed Adhesion Anchors

Anchor 0.2mm - Lip.stl

Wall / Monitor - Hook & Pen Stand.stl

I'm kinda obsessed with organizers and desk space savers. So here is a combined one. 

Print it without any supports.

Creality K1 build plate

This is the Creality K1 build plate model to be used with profiles

Another Retraction Test Tower - Multitester

A retraction test tower to test small and detailed features, bridges, letters and common overhangs.

Model uses about 6.2gms of material with 0.1 and about 5.5gms with 0.2 layer height and 15% infill

Amazon Echo Dot Gen. 4 wall fixture (for display less ones)

Amazon Echo Dot  fixture with a wider bracket. Designed for non-display model.

Amazon Echo Dot Fixture (wider wall mount)

Amazon Echo Dot Gen. 4 wall fixture

A simple wall fixture for the Echo Dot with or without display. Needs supports but not much. Painting the supports is a better option for this one.

DC Geared Motor

Tilt Feet for Tektronix TDS2012B

Tilt foot replacement part for Tektronix scope

Tilt Feet

Monitor Pen Stand

A 3D printable pen / pencil stand to attach on to the top of a monitor / TV

Monitor Hook

A 3D printable utility hook to attach on to the side of a monitor / TV

DoorCatch - Male.stl

Hi 👋
Born free. Born to engineer.

Make my day by supporting on
[Paypal](https://www.paypal.com/paypalme/kaushikbm) or [Buymeacoffee](https://buymeacoffee.com/kaushikbm)

Thank you

BuckyBrainz

Achievements

Seedling

Voyager

Fan Favorite