Cereal Bin Dry Box

Base v2.4.stl

Ikea365+ Drybox 10.6L

365+_Drybox_Roller_Frame v1.3mf

Measuring Jig for Mihai's Drybox Window Panels

Use this to quickly measure and mark the window panels for Mihai's Drybox. 

Marking & Cutting Jig for Mihai's Drybox

Bowden Tube Holder for K1

This is a press fit bowden tube holder for the Creality K1. If you connect a dry box or just want to guide the filament using a bowden tube, this will hold the tube in place.

Tolerances are important for it to press fit into the honeycomb.

Note - Print it vertical for maximum strength. No supports needed for printing but if you feel just add a brim for adhesion.

MODULAR SPOOL STAND

4x WHEEL.3mf

Modular Spool Holder (1kg Space Saver)

Centre_1ofeach.3mf

Power Switch Panel

Back.3mf

PC4-M6 Threaded Cap

I wanted to build a dry box but spend less time printing the interfaces... One of the solutions I put together was to use a PC4-M6 attached to a small section of TPFE tube and this cap to seal the end. Of course this is a waste of a PC4-M6 and so a temporary solution if you have a proper bowden setup. But if like me, you had these to spare, it does work a charm until I decide on/design/print a better solution.

desiccant box round

body

Hinges

LEFT.3mf

Filament Compression Fitting.3mf

Compression Fitting.3mf

Minimalist Spool Buffer

I keep my hygroscopic filaments in dryboxes.  Which works great, but  creates a problem when I unload the filament and need to rewind it into the box.  

Buffers take up too much space to fit easily into 22L SAMLA boxes.   Then I found Dombi3D's buffer for spools, but it worked with bottom berring feeders.   

I designed mine to fit 200mm (1kg) spools, and 4mm wood rods.  

You can customize it with the link to OnShape, as most of the model is parametric.   Change for your size spool or “rod”.  I just used wooden BBQ squewers. 

Fit's nicely  on medium sized printers (ie Ender3) 

Printed in PLA, infill doesn't matter.

Bowden tube caps for Dry boxes

BowdenCap.stl

FY-11 Digital Humidity /Temp. meter front mount

FY-11 is a Digital Humidity and Temperature panel meter. It is compact and cheap. Great to use inside dry boxes.

This is a mount for the FY-11 meter to be installed inside of a transparent enclosure.

Press-fit the meter in the mount and install with double sided sticky tape.

Drybox

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cereal Bin Dry Box

Ikea365+ Drybox 10.6L

Measuring Jig for Mihai's Drybox Window Panels

Bowden Tube Holder for K1

MODULAR SPOOL STAND

Modular Spool Holder (1kg Space Saver)

Power Switch Panel

PC4-M6 Threaded Cap

desiccant box round

Hinges

Filament Compression Fitting.3mf

Minimalist Spool Buffer

Bowden tube caps for Dry boxes

FY-11 Digital Humidity /Temp. meter front mount

PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints

Drybox turntable filament dispenser

No-Drill, Print From, 100% Dry Box Mod

Prusa enclosure filament guide mount

PSU MOUNT.3mf

Plastic House Dry Box Mount