Cable Spine

CableSpine_Wide_Thick_0.00mmcl.stp

MS DD Linear rail mount for Creality / Ender printers

Made this a full size version from my original that is also here on Thangs.
Minimal supports needed. I block the nut recessed areas, they don't need support but the slicer will want to put them there.
I included some pics of the blockers and the supports form Cura.
Printed with .2mm layers.
Recommend 1.2 mm walls and top, I went with 3mm on the bottom, this gave it a nice rigidity for the belt grooves. 
Pop in the M3 nuts after printing and secure them in place with a screw before installing on the printer, this will seat them well and let you know if you have an issue.
All the holes are in the same locations as the MS metal version, so attachments like CR or BL touch can be added without any issues, as well as fan shrouds.
I flipped the hook on the right for the wiring (ender 5 MS plate has this), it made more sense to me the way I have it.
You still need the Micro Swiss extruder hardware for this to work, if switching from rollers to linear rails and you already have a MS DD extruder, then this is perfect for you.
Pica aren't the best but you get the idea.


Adjustable Filament Spool Holder

Frame

Creality Spool Holder Memory Card 

card holder.stl

Raspberry Pi Camera Mount for Ender 2

ender2_raspicam2_mount-v2.step

PTFE Tube Pneumatic Fitting

.STEP model of the pneumatic fitting commonly on Creality hotends with bowden tubes.

PTFE Tube Pneumatic Fitting.step

Creality Ender 3 - Replacement extruder Knob

Extruder Handle.stl

Belt Idler for Original Ender 3 Y-Belt

Designed to prevent Ender 3 Y-belt from rubbing on the aluminium extrusion and raise the belt a bit to make it parallel

TFT32 Mount for Ender 3

tft32_mount_ender3_left.stl

Meanwell_LRS-350-24_cover_v2.stl

Back cover/endpiece for a Meanwell LRS-350-24 on a Creality CR-10v3. The IEC60320 C14 inlet and rocker switch are two separate pieces, so i remixed https://thangs.com/designer/Dumdumdev/3d-model/PSU-Cover-v4stl-LRS35024-Meanwell-11181 and added the rocker switch slot and some extra space for cabling, &c.

Ender-3 Max Camera Mount

Ender-3 Max camera mount. Uses the screws on the front of the extrusion frame.
Glued a piece of tin steel to mount a magnet camera.
Might also fit other Ender models

Locking Block

This is the block that holds the things without any nut-bolt or external things.

" 3D Part Details "

@3D Printing:--
Printer Name :- Creality CR 10 MAX 3D
Printer
Nozzle Size :- 0.8mm

@Wall :--
Wall Line Count :- 4

@Top/Bottom:--
Top/Bottom thickness :- 1.0mm
Top Layer :- 2
bottom Layer :- 2

@Infill :--
Infill Density :- 100%
Infill Patten :- Grid
Infill Line Multiplier :- 2

@Speed :--
Print Speed :- 50mm/s
Infill Speed :- 50mm/s
Wall Speed :- 25mm/s
Outer Wall Speed :- 25mm/s
Inner Wall Speed :- 25mm/s
Top/Bottom Speed :- 25mm/s
Travel Speed :- 150mm/s

@Support :---
Generate Support :- No Support

Video are also there :--

2x2020 50mm Hefty Foot

Some time ago I needed to replace fans under mobo and PSU. To do it, I needed 50mm clearance, so I designed that Hefty Feet.

You can use it in 3 ways:
- just slide them in to profile
- bolt to profile with 3x m4 nuts and screws (min lenght 15mm)
- bolt down to surface with 5mm countersunk screws

I printed them with 10% gyroidal infill and pour resin inside with steel shavings filler.

2x2020 50mm Hefty Foot.obj

Vibration Damping Feet

Vibration Damping Feet (1 nut).stl

Tool Rack For 3D Printer

All the instructions are in the video
The only thing i reccomend is the 2 boards , board joint and the clips to do in 100% infill , it should fit most of the creality printers with those frame . 
https://youtu.be/RVpL7uQasog

Ender 3 series PTFE-to-Creality Direct Drive Extruder Arm Conversion

Since humidity is an issue in my area, I use Rubbermaid 21 cup dry boxes with a reverse Bowden setup on all my printers to minimize the filament's exposure to the air. My Ender 3 Pro is setup for direct-drive extrusion. The stock Creality extruders (plastic and aluminum) don't have a threaded inlet for a PTFE fitting. I'm not content with using a stop at the top 2020, which leaves a good amount of filament exposed, subject to getting brittle, causing breakage. I designed this glue-on conversion for the Creality extruder arms and will work with any PTFE fitting that use the M6 threaded ends.

My top-most criteria was to have it strengthen the plastic version of the Creality extrusion arms, hence the thickness or height of the conversion piece. I also wanted to make sure torque on the PTFE fitting, while the hotend was traversing the X-gantry, wouldn't cause the conversion to loosen up or break due to flexing.

I decided to tap the threads instead of designing them in. Ample reinforcement has been added around the hole so that tapping won't break into the infill. With this method the size and shape of the threaded hole is guaranteed regardless of the filament used and the accuracy of the printer.

If you don't have an M6x1.0 tap, and aren't interesting in acquiring one, you can make one by:

1 - filing two opposing grooves along half the length of an M6x1.0x10+mm screw with a jeweler's file

2 - running it in and out of the hole a little at a time, until the threads are cut all the way through the hole.

15% infill with a Grid pattern is ample as long as you use at least 4 walls (perimeters) I recommend 6. 5-minute epoxy and small hobby clamps will secure the conversion piece to the topside of the extruder arm, which should be done with the arm removed from the extruder. Make sure no epoxy gets into the PTFE threaded area or in the filament hole of the arm. Leave overnight to fully cure.

The two extruders shown are the plastic model that comes on the Creality Ender 3 series and the red anodized aluminum one (on my Ender 3 Pro) that comes with the Creality direct drive kit.


Axis Reference - Ender 3 Pro

Are you an utter buffoon like myself, and constantly mixing up your axis when manually moving your printerhead?
Set yourself up with a 3D printed axis reference, to completely remove the thinking part about this equation!

Ender 3V2 Hotend Fan Cover Housing Duct

E3D Revo Nozzle Holder for 2020 Extrusions

Revo_Nozzle_Storage_2020_V1.step

Creality Sprite ADXL345 Mount

Adafruit ADXL345 mount for the Creality Sprite Pro Upgrade Kit. You will need an Adafruit ADXL345 and (3) M3-6 screws.

Creality

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cable Spine

MS DD Linear rail mount for Creality / Ender printers

Adjustable Filament Spool Holder

Creality Spool Holder Memory Card

Raspberry Pi Camera Mount for Ender 2

PTFE Tube Pneumatic Fitting

View 17 new models

Belt Idler for Original Ender 3 Y-Belt

View 25 new models

Meanwell_LRS-350-24_cover_v2.stl

Ender-3 Max Camera Mount

Locking Block

2x2020 50mm Hefty Foot

Vibration Damping Feet

Tool Rack For 3D Printer

Ender 3 series PTFE-to-Creality Direct Drive Extruder Arm Conversion

Axis Reference - Ender 3 Pro

Ender 3V2 Hotend Fan Cover Housing Duct

E3D Revo Nozzle Holder for 2020 Extrusions

Creality Sprite ADXL345 Mount