Neewer Microphone Wire Cable Clip.

Hey!!!

This is a Neewer Microphone Wire Cable Clip. that I designed to hold the cable along the mic stand frame.

Happy printing.

Estikuma

If you are feeling generous, please consider buying me a [coffee](https://www.buymeacoffee.com/estikuma) :)

Instagram: [Click Here](https://www.instagram.com/estikuma/)

Youtube: [Click Here](https://www.youtube.com/channel/UCP1AcuaH3VgFQMCsB4b-0zQ)

[Estikuma.com](https://estikuma.com/)

Neewer Microphone Wire Cable Clip

Game Boy Advanced Display Stand

Hey!!!

This is a Game Boy Advanced Display Stand that I designed to display my handheld. 

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Handheld :D

Happy printing.

Estikuma

If you are feeling generous, please consider buying me a [coffee](https://www.buymeacoffee.com/estikuma) :)

Instagram: [Click Here](https://www.instagram.com/estikuma/)

Youtube: [Click Here](https://www.youtube.com/channel/UCP1AcuaH3VgFQMCsB4b-0zQ)

[Estikuma.com](https://estikuma.com/)

Game Boy Advanced Display Stand

GBA.stl

Nintendo DSi Wide Display

Hey!!!

This is a Nintendo DSi stand that I designed to display my handheld. It also has two slots at the back to hold two game carts.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Handheld :D

Happy printing.

Estikuma

If you are feeling generous, please consider buying me a [coffee](https://www.buymeacoffee.com/estikuma) :)

Instagram: [Click Here](https://www.instagram.com/estikuma/)

Youtube: [Click Here](https://www.youtube.com/channel/UCP1AcuaH3VgFQMCsB4b-0zQ)

[Estikuma.com](https://estikuma.com/)

Nintendo DSi Wide Display

Nintendo_DSi_Wide_Display.stl

A Nintendo Switch Game Case Display that can hold up to 8 games.

Happy printing.

Estikuma

If you are feeling generous, please consider buying me a [coffee](https://www.buymeacoffee.com/estikuma) :)

Instagram: [Click Here](https://www.instagram.com/estikuma/)

Youtube: [Click Here](https://www.youtube.com/channel/UCP1AcuaH3VgFQMCsB4b-0zQ)

[Estikuma.com](https://estikuma.com/)

Information
-This model is for personal use only.
-The model is not for resale, alteration, manufacture of molds and castings for resale.
-This design is not for resale or redistribution.
-This design is not for resale or redistribution of printed parts or molds.
-No physical product will ship for this purchase.
-Unfortunately, I cannot offer refunds on digital files.

This is not an officially licensed product and is consider “fan art.”
If you have any concerns regarding this product, then please contact me.

NSGCDx8.stl

A Nintendo 3DS xl Display Stand for your handheld.

Happy printing.

Estikuma

If you are feeling generous, please consider buying me a [coffee](https://www.buymeacoffee.com/estikuma) :)

Instagram: [Click Here](https://www.instagram.com/estikuma/)

Youtube: [Click Here](https://www.youtube.com/channel/UCP1AcuaH3VgFQMCsB4b-0zQ)

[Estikuma.com](https://estikuma.com/)

Nintendo 3DS xl Display Stand

Nintendo Switch Game Case Stand. Display your favourite Pokemon Switch game case.

Happy printing.

Estikuma

If you are feeling generous, please consider buying me a [coffee](https://www.buymeacoffee.com/estikuma) :)

[Instagram](https://www.instagram.com/estikuma/)

[Estikuma.com](https://estikuma.com)

Nintendo Switch Game Case Stand

Nintendo Switch Game Case Stand. Display your favourite Pokemon Switch game case.

Happy printing.

Estikuma

If you are feeling generous, please consider buying me a [coffee](https://www.buymeacoffee.com/estikuma) :)

Instagram: [Click Here](https://www.instagram.com/estikuma/)

[Estikuma.com](https://estikuma.com)

Nintendo Switch Game Case Stand.stl

Nintendo Switch Game Case Display. Display your favourite Pokemon Switch game case.

Happy printing.

Estikuma

If you are feeling generous, please consider buying me a [coffee](https://www.buymeacoffee.com/estikuma) :)

Instagram: [Click Here](https://www.instagram.com/estikuma/)

[Estikuma.com](https://estikuma.com)


Nintendo Switch Game Case Display

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5214935.

Saint Patricks Day Decoration.

Can be printed at different layer heights for a multi-coloured design. 

Happy printing.

Estikuma

Find me on [Instagram](https://www.instagram.com/estikuma/) 
Website: [Estikuma.Com](https://estikuma.com/)
3D Printing & 3D Modelling Discord: [3D Distillery](https://discord.gg/sCBqtwYZ)
Donations: [Buy Me A Coffee](https://www.buymeacoffee.com/estikuma)

Prop Models Available here: [Etsy Store](https://www.etsy.com/ie/shop/Estikuma?ref=seller-platform-mcnav)

Saint Patrick's Day

PSA/CGC Card Display Stand - No Logo

PSA Card Display Stand - No Logo

PSA Card Holder No Logo 8mm.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4961100.

Zero Two - Wall Decoration

Happy printing.

Estikuma

Find me on [Instagram](https://www.instagram.com/estikuma/) 
Website: [Estikuma.Com](https://estikuma.com/)
3D Printing & 3D Modelling Discord: [3D Distillery](https://discord.gg/sCBqtwYZ)
Donations: [Buy Me A Coffee](https://www.buymeacoffee.com/estikuma)

Prop Models Available here: [Etsy Store](https://www.etsy.com/ie/shop/Estikuma?ref=seller-platform-mcnav)

Zero Two - Wall Decoration

Vertical stand for your Nintendo DSi.

Hey!!!

This is a Nintendo DSi stand that I designed to display my handheld. It also has two slots at the back to hold two game carts.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Handheld :D

Happy printing.

Estikuma

DSI Stand.stl

Happy Halloween. This is a THICC Halloween Pumpkin !!!!!

Enjoy!

Happy printing.

Estikuma

Thicc Pumpkin

Pumpkin.stl

Hey!!!

This is a Game Boy Pocket stand that I designed to proudly display my handheld.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

I used a Brim to print mine, but I think you can get away with just using a skirt (Check your bed level.)

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Game Boy :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

Gameboy Pocket Base.stl

Hey!!!

This is a Rigid Toploader Display Stand (78.5mm) that I designed to proudly display some of my favorite Pokemon trading cards.

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your trading cards

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee.
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

Toploader 78.5mm Rigid.stl

Hey!!!

Halo Extermination medal brought to life. I haven't printed this yet so I will leave it as a work in progress.

If you print it can you please send me a picture on here or my IG page, I'd really like to see the design being used :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

Halo Extermination Medal.stl

Hey!!!

This is a Hexagon Spool Holder that I have designed. I hope you like it.

Note:
Four 609 bearings are required for this spool holder.

If you print it can you please send me a picture on here or my IG page, I'd really like to see the design being used :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

Hexagon Spool Holder

HEX_Base_Print_1_off.stl

Hey!!!

This is a simple DND Miniature carry case that I designed.

When you first print it, the thread will be very stiff but keep opening and closing the case to smoothen it out.

If you print my stand please send me a picture on here or my IG page, I'd really like to see the design being used to showcase your Game Boy :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

Miniature Carry Case

Holder Base.stl

Hey!!!

This is a Pokemon Game Boy Advanced SP Stand, that I have designed. I hope you like it.

I will be adding more faceplates soon, so you will be able to print more than just the pokemon faceplate if you so wish.

If you print my stand please send me a picture on here or my IG page, I'd really like to see the design being used to showcase your Game Boy :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

Pokemon Game Boy Advanced SP Stand

SP Stand Base.stl

Hey!!!

This is a PSA Card display stand that I designed for your slabs. Print one and display your cards in style.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 10-20%

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used with your pokemon cards.

Note: This stand does not fit CGC cards, I'll be posting an updated model for that soon.

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

PSA/CGC Card Slab Holder.stl

Hey. If you are a beginner and want to learn more about 3D printing, please consider my webinar at the attached link, Thank you. Have a nice day:

https://thebeginnersguideto3dprinting.com/flagship-frameworkf21hihib

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Hey!!!

This is a PSA Card display stand that I designed for your slabs. Print one and display your cards in style.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 10-20%

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used with your pokemon cards.

Note: This stand does not fit CGC cards, I'll be posting an updated model for that soon.

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

PSA Card Slab Holder.stl

PSA Card Holder Logo 8mm.stl

Hey!!!

This is a Legend Of Zelda Game Boy Colour stand.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

If you print my stand please send me a picture on here or my IG page, I'd really like to see the design being used to showcase your Game Boy Colour :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

The Legend of Zelda - GBC Stand

Hey. If you are a beginner and want to learn more about 3D printing, please consider my webinar at the attached link, Thank you. Have a nice day:

https://thebeginnersguideto3dprinting.com/flagship-frameworkf21hihib

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Hey!!!

This is a Legen Of Zelda Game Boy Colour.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

If you print my stand please send me a picture on here or my IG page, I'd really like to see the design being used to showcase your Game Boy Colour :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

The Legend of Zelda GBC Stand v5.stl

Update: From the original V1, I've added a slot at the back to hold a game cartridge.

Hey!!!

This is a Game Boy Colour (V2) stand that I designed to proudly display my handheld.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%
I used a Brim to print mine, but I think you can get away with just using a shirt (Check your bed level.)

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Game Boy Colour :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

Print Settings
Printer brand:
Creality

Printer:
CR10S PRO

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
15-25

Gameboy Stand V2.stl

Hey. If you are a beginner and want to learn more about 3D printing, please consider my webinar at the attached link, Thank you. Have a nice day:

https://thebeginnersguideto3dprinting.com/flagship-frameworkf21hihib

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Update: From the original V1, I've added a slot at the back to hold a game cartridge.

Hey!!!

This is a Game Boy Colour (V2) stand that I designed to proudly display my handheld.

Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

I used a Brim to print mine, but I think you can get away with just using a shirt (Check your bed level.)

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Game Boy Colour :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

Print Settings
Printer brand:
Creality

Printer:
CR10S PRO

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
15-25

Hey!!!

This is a Game Boy Colour stand that I designed to proudly display my handheld.

I used a Brim to print mine, but I think you can get away with just using a shirt (Check your bed level.)

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Game Boy Colour :D

Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram: https://www.instagram.com/estikuma/

3D PRINTING SETTINGS
Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

 3D file format: STL
 3D model size: X 70 × Y 88 × Z 36 mm

Gameboy Colour Stand

Hey. If you are a beginner and want to learn more about 3D printing, please consider my webinar at the attached link, Thank you. Have a nice day:

https://thebeginnersguideto3dprinting.com/flagship-frameworkf21hihib

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Hey!!!

This is a Game Boy Colour stand that I designed to proudly display my handheld.

I used a Brim to print mine, but I think you can get away with just using a shirt (Check your bed level.)

If you print my stand please send me a picture on here or my IG page, id really like to see the design being used to showcase your Game Boy Colour :D

Happy printing.

Estikuma

Instagram: https://www.instagram.com/estikuma/

3D PRINTING SETTINGS
Printer: Creality Ender 3
Supports: None
Nozzle: 0.4 @ 0.2mm layer height
Infill: 15-25%

 3D file format: STL
 3D model size: X 70 × Y 88 × Z 36 mm

MK 3 Arc Reactor Helmet Stand #FranklyBuilt

Hey everyone.

This is my very first upload for any of my designs, I hope someone likes it.

This is an Iron Man helmet stand that was inspired by Tonys early Arc Reactors.

I've gone with similar colours to the Fusion 360 colours, but I'm sure someone can come up with some wacky colours if it gets printed. (Check your bed level before attempting. )

Rafts
I used rafts for all of the tall pieces to ensure they stayed upright. Printed all the base pieces directly onto the glass bed of my ender 3 and they turned out better than I expected.

PDF Drawing
The attached PDF drawing includes som more information and the quantity of each piece you will need.

Note:
You will need to print 3 of the support pieces, they will connect the base to the upper ring. There are meant to be tight-fitting, but I've used glue to make sure they hold.

If there are any issues please comment and I will make changes if needed.

Thanks for looking, Happy printing.

Estikuma

If your feeling generous, please consider buying me a coffee :)
https://www.buymeacoffee.com/estikuma

Instagram:
https://www.instagram.com/estikuma/

3D PRINTING SETTINGS
Printer brand:
Creality

Printer:
Ender 3

Resolution:
0.2

Infill:
25%

Filament_brand:
N/A

Filament_color:
N/A

Filament_material:
PLA

MK 3 Arc Reactor Helmet Stand #FranklyBuilt

Mechanical Engineer

Fusion 360 User / Blender Noob

Cork, Ireland

www.estikuma.com


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like