Foil, cling wrap, wax paper, etc. organizer for pantry shelf. Wire & solid shelf versions available in multiple sizes Organizer designed to hold foil, cling warp, wax paper, etc. boxes. Store 6, 8, o

Remix of Gridfinity Cricut Blade Holders by jrsunday It kinda speaks for itself.

Thank you for downloading! This is my first model, so please feel free to leave feedback so I may make improvements! This plastic wrap holder is designed to hold a 12 inch roll, each piece is in sep

These shims for my Traxxas Drag Slash Wheelie Bar Mount (RDD3611) can be used to accommodate an aftermarket chassis with a different thickness than the stock tub (4mm). They can also be used in conj

Print with your favorite printer and settings with any material. I have not printed the screw version as I used alien tape to secure to cabinet door. The tape version has two recessed areas for placem

Discover my innovative 3D model: a practical and beautifully designed aluminum foil holder, created for ultimate convenience and superior aesthetics. Tired of dealing with standard carton packaging, t

We needed to make uniform sheets of aluminum foil in my lab. Flat section is used to measure out a lot of foil, and the edge is used to help cut the sheet. edit 6/12/23 The foil sheet sizes is 6"

Kitchen cupboard tidy for rolls of foil, cling film etc. I screwed this to the back of a cupboard door printed using PLA. I should of used support as the screw holes were weak.

I found that the screw-together baseplates from the Gridfinity OpenSCAD generator tend to curl when screwed, as the bottom part gets compress

A simple cover for Gardyn ports, to prevent algae growth. The foil cover is meant to hold down a piece of aluminium foil. Place a square of foil over the port and use the cover to hold it down. P

Stabilizes the Z axis lead screw with proper thrust bearing and axial bearings on each side. Takes load completely off the stepper.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4887833. I was asked by my nephew to help mount a rudder on his Lifetime Yukon kayak. The stern is not flat and has no b

Stabilizes the Z axis lead screw with proper thrust bearing and axial bearings on each side. Takes load completely off the stepper.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5376507. Here is a quick and dirty way to keep your precious 0.1mm (or other) shim stock flat and easy to use for bed lev

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1154254. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/a3ZVjNmVDgV

Vulring legohoofd (shim lego head)

While extremely niche, I thought maybe someone out there could use this. Don't know what LEGO Modulex is? Check out [this article](https://www.newelementary.com/2017/11/old-bricks-what-are-modulex-leg

.4mm Shim for Custom Flash Hider

Simple set of scope shims. 0.5 degree drop for 2 piece scope mounts where the leg of each mount is 20mm long and they are spaced 60mm apart. Designed to still keep the clamps square, so the scope won'

The 3DJake flex plate system is thicker than other ones on the market (Wham Bam, etc) if you use one designed for the wham bam plate you'll have your plate trying to grind into the screen Fit between

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4687031. An anti-wobble shim to minimise wobble for certain circular lazy susan shelves. Created to stop a Rev-A-Shelf

Shim for foil -1 angle. Foilsurfing

.1mm Shim for Custom Flash Hider

Gridfinity holder for screen shim similar to this

.5mm Shim for Custom Flash Hider

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2810293. I have built the Prusa i3 Bear Half (https://www.thingiverse.com/thing:2562174) which is a Prusa i3 frame up

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4745925. This is an OpenSCAD version of the original WB Spacer by psdesign. It allows you to vary the thickness of the sh

.2mm Shim for Custom Flash Hider

.3mm Shim for Custom Flash Hider

Update IV 12-31-23: Corrected the size of the central spindle hole on all versions to match the Bambu Lab original STLs. Current versions are V3 and V7. The slightly increased diameter allows my

This is a flash hider/muzzle brake of my own design combining elements from various popular flash hiders found in popular video games. This has a 14mm CCW thread that allows fitting to airsoft replic

This is a flash hider of my own design combining elements from various popular flash hiders found in popular video games. Would it work IRL??? Probably not!!! This has a 14mm CCW thread that allows f

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5173506. Honeycomb Raspberry Pi Zero 2 W Case with Optional Extrusion Mount This design is based on my case for the

A Reusable Spool that will help and remind you to be more eco-friendly! I remixed the spool STL originally provided by Bambu Lab on their [WikiPage](https://wiki.bambulab.com/en/knowledge-sharing/bam

Shimmy Shimmy Shim It Level! Have a wobbly & unlevel desk or table? Use these Foot Risers to balance things out! I designed these to help level out my FlexiSpot Standing Desk in a highly unlevel

1x3 plate mount for the Mingda Magician X wanted something to hold the tool caddy. could be adapted for more but i think it would be hard on the clip. designed to be used with head set inserts, prin

This is a wall mount housing for a RJ45 coupler. 26mm diameter. Coupler inlays: https://amzn.to/3wgBSPD Additionally needed: 1 step drill (https://amzn.to/3K2wRjk) 2 screws M3x30 (https://a

This box is a collaboration between me and Randomizy. I designed the mechanical box and she sculpted the magnolia flower on top. This box is a outcome of a special request

Any questions reach out on Instagram - https://www.instagram.com/designbydave_aldrich/ Medium Size Now Available - https://thangs.com/designbydave/DBS-3D-Printed-Carbon-Fiber-Bicycle-Frame--Medium-42

Here are 3D files, to make this hybrid pumping foilboard using a combination of 3D printing and composite materials! I provid a split version (twenty parts) so that every printer can print it! You c

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4564617. <h3>This is an alternative mount adapter for 3Dtouch or BLtouch.</h3> Designed for the "Two Trees Bluer" 3d p

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5202633. Print in ABS with high infill. PETG or CF PLA will probably work as well. Sizes of components and spacers are im

Any questions reach out on Instagram - https://www.instagram.com/designbydave_aldrich/ Medium Size Now Available! Small Size Here - https://thangs.com/designbydave/DBS-3D-Printed-Carbon-Fiber-Bicycle

This is the Botlamp V1. It is a reminiscence of Robots. The head can spin 360 and preferable light can be adjusted. After creating this lamp I fell asleep and dreamt of a system message saying somethi

Hello Tribe The Justice moves swiftly in the Shadowstreak lancer now the Voidfang have an apc to move quickly across the battlefield, also great for your adventures or armies in Darkstar Chronicle i

Uploaded by Thangs Sync

A simple cover for Gardyn ports, to prevent algae growth. The solid cap just blocks unused ports. Print in PETG or TPU, it should be snug but not "tight".

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5149605. Description I wanted to try a Direct Drive setup on the Flsun Q5 and came across the Mellow NF Sunri

Explore the compelling universe of Darkstar Chronicles with our meticulously designed Voidstreak Destroyer Hover Tank 3D model, a prime addition to any Voidfang army. A versatile model, the tank also

This is a shim to print and place under your batteries in the Megacell Charger ( Batch 1 and 2 ) ... it prevents 18650 cells from rocking and making bad contact due to the small temperature sensor tha