Hi Folks!

This one was requested many times and I had a blast making it! It is completely multipart (excluding the knife for structural strength reasons), so you don’t need a multi-color printer to print it in different colors. I included 3MF pre-colored files in case you don’t want to glue parts together, but keep in mind it will generate a lot of purge waste.

Note: The default cup is right-handed. Please mirror all the files in your slicer for a left-handed version.

Printing:

• Only the cup and mask require supports — use organic/tree supports.
• The mask is already oriented for the best results, so do not lay it down. Use a brim to ensure it holds.
• Some areas have thin walls, which may result in tiny holes in hidden/non-visible spots. To prevent this, enable Detect thin walls in your slicer.
• You will need glue to assemble all the parts.

Features:

• Storage for two spoons on the back
• A hole at the bottom to help push the pint up when you’re nearly done

The holder has been tested with Ben & Jerry’s and Häagen-Dazs pints, but you may need to rescale it for your preferred brand. To help with that, I included a Size_Tester.stl — print it first to check the fit. If it’s off, just scale accordingly.