CardDock for Italian Playing Cards - Auto-aligning Card Deck Holder and Case
This version of CardDock is for Italian playing cards. It is a unique card cradle that automatically aligns the cards once they are dropped on the CardDock. The CardDock is also a card case so you have somewhere to keep your deck of cards safe when not in use. A selection of external hard cases are included to protect the CardDock and Cards for safekeeping.
The lid can be snapped onto the underside of the CareDock to lift the CardDock up off the playing surface away from spilled drinks and dirt.
This CardDock is made for cards measuring approximately 2.01 in. (51 mm) wide by 4.09 in. (104 mm) long and 40 cards stacking to a height of about 0.5 in. (13 mm) high.
100% printed - no hardware, fasteners, or adhesives required. No support is required. See included image for Print Settings
Related Links Standard playing cards, single deck; https://than.gs/m/1326834 Standard playing cards, double deck; https://than.gs/m/1332115 Bridge cards, double deck; https://than.gs/m/1333752 UNO cards, 112 count; https://than.gs/m/1332775 Pokemon and similar cards, 60 count; https://than.gs/m/1333423
Crib Boards Standard Size Folding Board https://than.gs/m/1165557 Extra Large Folding Board https://than.gs/m/1326829 Marathon (100 game) Board https://than.gs/m/1326832
Visit my blog for more information and other designs: https://www.logicalplanet.com/
Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.
CardDock for Italian Playing Cards - Auto-aligning Card Deck Holder and Case
Logical Modular Planters
CollarPod 40 - Poop Bag Holder for Dog Collars - 1.5 Inch Collar - Single Piece TPU - No Assembly
CollarPod 26 - Poop Bag Holder for Dog Collars - 1 Inch Collar - Single Piece TPU - No Assembly
CollarPod 17 - Poop Bag Holder for Dog Collars - 5/8 Inch Collar - Single Piece TPU - No Assembly
BeltPod 40 - Poop Bag Holder for Your Belt - Single Piece TPU - No Assembly
Logical Scraper B - 1 Piece No Screws No Assembly
Logical Scraper A — 2 Piece, No Screws
LGP Self-Watering Tray — Modular Bottom Watering Reservoir for the Logical Grow Platform
LGP Single Cell ThirdTray — Modular Grow Cell for the Logical Grow Platform
LGP Single Cell HalfTray — Modular Grow Cell for the Logical Grow Platform
LGP 2×3 Cells XL HalfTray — Modular Seed Starting Tray for the Logical Grow Platform
LPE25 Clampless Quick Connect
H2 Series Waste Bin
Exhaust Header for Bambu Lab H2 Series Printers
Lazy Susan 120 v3.0
Lazy Susan 160 v3.0
Lazy Susan 200 v3.0
Lazy Susan 240 v3.0
Lazy Susan 280 v3.0
Hi, I love this design. Is it possible to have a version for Italian romagnole playing cards? I printed the already existing version for the italian cards, without checking the dimensions, and it turned out being different size hahaha. Dimensions are 51 x 91 x 14 mm for 40 cards (measured with the calliper but I don't know the tollerances). Thank you
Yes. Please email me at logicalplanet3d Gmail.com
Thanks for the model. I did print it. The internal bits worked great, but they didn't fit inside the rugged case, not sure if I did something wrong. But doing some caliper measurements of the width of the inner casing and the outer housing suggests I beg to increase the outer housing to 103.75ish % Will test it next week... But thanks again. The Briscola cards fit the inner bits perfectly.
Hi, you were correct, I made an error. I think the width was wrong. I have corrected that but the versioning is not working on thangs at the moment so you may or may not be able to download the revised files there. The new files are labelled 1v00a7. If you can not find them there, please email me at logicalplanet3d gmail.com and I will send them to you.
oh, thank you for the feedback. It is possible I made a mistake. I will review it and let you know shortly.