A super quick and fun print! Keep track of your reading with this delightful little worm.

Print solid with 1 perimeter.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Basic Gradient (Solar Breeze)](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

Bookworm // Bookmark, Paperclip

Bookworm.stl

A super quick and fun print! Keep track of your reading with this delightful little grub.

Print solid with 1 perimeter.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Basic (Bambu Green)](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

Bookgrub // Bookmark, Paperclip

Bookgrub.stl

The [**PLEIADES Collection**](https://thangs.com/search/PLEIADES%20creator%3A%22Make%20Anything%22?scope=thangs) features elegant and minimal forms with facetted stripes that add strength as well as a beautiful appearance.

**PLEIADES 004** can function as a vase, planter, or other multipurpose container. 100mm tall and about 60mm in diameter.

This series of prints is designed to be printed in vase/spiral mode in your slicer. I suggest printing this model with a **0.8 mm extrusion width** (even with a 0.4mm nozzle). 

**Make sure your slicer is not set to close small gaps.** In BambuStudio and Cura I set the _'Slice gap closing radius'_ to 0 mm

For the 'hole' version, adjust bottom solid layers to be 1.2 mm thick (or the maximum number of layers before the hole is covered). Of course you can also print the standard version and drill drainage holes into the bottom after printing. No top layers. 

---

Photographed model was printed on the [QIDI Q1-Pro 3D Printer](https://amzn.to/4a1BtS9) using [Bambu Lab PLA-CF filament](https://bit.ly/bamFIL).*

Also pictured is my [140mm Light Floating Drip Tray](https://than.gs/m/1111538?affiliateCode=MAKE) printed at half scale.

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

*FREEBIE* PLEIADES 004 Vase/Container

PLEIADES 004_hole.stl

The [**PLEIADES Collection**](https://thangs.com/search/PLEIADES%20creator%3A%22Make%20Anything%22?scope=thangs) features elegant and minimal forms with facetted stripes that add strength as well as a beautiful appearance.

This download includes planters 001,002, 003, and 004 which complement each other to form a large, cohesive set. [**PLEIADES 001**](https://than.gs/m/1116527?affiliateCode=MAKE) is 100mm tall and about 240mm in diameter. [**PLEIADES 002**](https://than.gs/m/1116537?affiliateCode=MAKE) is 160mm tall and about 160mm in diameter. [**PLEIADES 003**](https://than.gs/m/1116546?affiliateCode=MAKE) is 200mm tall and about 120mm in diameter. [**PLEIADES 004**](https://than.gs/m/1116555?affiliateCode=MAKE) is 100mm tall and about 120mm in diameter.

This series of prints is designed to be printed in vase/spiral mode in your slicer. I suggest printing this model with a **0.8 mm extrusion width** (even with a 0.4mm nozzle). 

**Make sure your slicer is not set to close small gaps.** In BambuStudio and Cura I set the _'Slice gap closing radius'_ to 0 mm

For the 'hole' version, adjust bottom solid layers to be 1.2 mm thick (or the maximum number of layers before the hole is covered). Of course you can also print the standard version and drill drainage holes into the bottom after printing. No top layers. 

---

Photographed model was printed on the [QIDI Q1-Pro 3D Printer](https://amzn.to/4a1BtS9) using [Bambu Lab PLA-CF filament](https://bit.ly/bamFIL).*

Also pictured are the [Light Floating Drip Trays](https://than.gs/m/1111542?affiliateCode=MAKE)

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

PLEIADES Planter Set 001, 002, 003, 004

PLEIADES 001_hole.stl

PLEIADES 004.stl

The [**PLEIADES Collection**](https://thangs.com/search/PLEIADES%20creator%3A%22Make%20Anything%22?scope=thangs) features elegant and minimal forms with facetted stripes that add strength as well as a beautiful appearance.

**PLEIADES 003** can function as a vase, planter, or other multipurpose container. 200mm tall and about 120mm in diameter.

This series of prints is designed to be printed in vase/spiral mode in your slicer. I suggest printing this model with a **0.8 mm extrusion width** (even with a 0.4mm nozzle). 

**Make sure your slicer is not set to close small gaps.** In BambuStudio and Cura I set the _'Slice gap closing radius'_ to 0 mm

For the 'hole' version, adjust bottom solid layers to be 1.2 mm thick (or the maximum number of layers before the hole is covered). Of course you can also print the standard version and drill drainage holes into the bottom after printing. No top layers. 

---

Photographed model was printed on the [QIDI Q1-Pro 3D Printer](https://amzn.to/4a1BtS9) using [Bambu Lab PLA-CF filament](https://bit.ly/bamFIL).*

Also pictured is my [140mm Light Floating Drip Tray](https://than.gs/m/1111538?affiliateCode=MAKE)

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

PLEIADES 003 Vase/Container

PLEIADES 003_hole.stl

**Devin Montes is the Artist/Designer/Creator behind [Make Anything on YouTube](https://youtube.com/@make.anything)**

_Together we can build the world we want to live in! One with puzzles and pegboards… and springos. Everything springos!_


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Friends, the other day I decided to make this for my sons room. I love 3DP for this kinda thing. All the parts print and thread together easily. The only MMU is the top ceramic part. I designed this to be used with a cheap and small LED strip off Amazon... [HERE](https://amzn.to/4fDxqzw)

To add the lighting, you wrap the LED's around the Lighting pole, and then feed it and thread it into the top ceramic piece. There is holes to feed the wiring back and down the wall. 

While this threads together, feel free to assemble how you like it and then add a drop of glue. To lock it in place. Getting things to line up like this with threads is challenging. So line it up how you like it and then a drop of glue. or don't up to you. 

SPARK PLUG WALL LIGHT, SCONCE, KIDS ROOM, GARAGE, NGK, CARS, GEAR HEADS

UPPER CERAMIC LED LOGO.stl

(This is being pre released at the $35 tier for testing and feedback. Scheduled Release for all is September 2) It's pre release and testing time for the Friday the 13th Bear. Please give me feedback if anything needs improved. 

JASON VOORHEES, CARE BEAR, FLEXI, ARTICULATED, FRIDAY THE 13TH, HALLOWEEN

JASON BAMBU.3mf

Last year I was asked to make these on or about October 20th. Despite my efforts to make a perfect model, I just didn't have the time to print them etc. So I did the best I could in the Computer, and felt 99% confident that they would do well. Well I made some design choices that didn't translate well.

So this is my redemption arc.

I have added the witch buckets which was also a ton of communication I got.

SO PLEASE READ THIS.... I HAVE NOT PLATED, PAINTED OR ORIENTATED ALL MODELS. SO PLEASE USE THE AUITO ORIENTATE FUNCTION.

SADLY TO GET CLOSE TO REAL BUCKETS, THERE ARE PARTS  WHERE SUPPORTS ARE NEEDED ON THE BUCKETS AND LID. ON THE BUCKET JUST UNDER THE "BUTTON" WHERE THE HANDLE CONNECTS. ON THE LID YOU NEED TO SUPPORT THE OUTSIDE EDGE AND ON THE PUMPKIN LIDS YOU NEED TO DO THE CENTER A LITTE.

Please STAY SPOOKY... and Print, Share and Tag me.

Boo Buckets - Happy Meal Buckets, Witch, Boo, Franken buckets from 80's Happy Meals

WITCH BUCKET 2.stl

This was the most popular annoying box on the market last year. I personally had hundreds of orders for them. When I got the orders, I didn't have time to put final touches on the model to optimize for profit etc. This version will work the same, the bolts are the same etc. But the box has been improved, and more importantly lightened by 40%. I went through and trimmed everywhere I could. This makes this model much more profitable. 

This is print in place... you need 50 screws, inside center cash holder, and finally a tool that threads into the back of it. 

So enjoy! 

MINI ANNOYING BOX - 2024 UPDATE, CHRISTMAS, GIFTS, BIRTHDAYS , GRADUATION

MINI ANNOYING BOX - NON BAMBU.3mf

This is a new version of my popular Tall Milwaukee Can Cup for the Milwaukee Packout lids. This is designed to accept a Monster Can. 

This version is the same as the last one in many ways. but this one has a threaded lid. This was a request from my members. It's more robust and reliable. 

Milwaukee Style Packout - 16oz Monster Can Cup, For Packout Cases, MMU and Single color

THREADED CAN CUP SINGLE COLOR.stl

After watching the new movie I knew I had to start working on some things like this. Get stabby on some cardboard with this little guy or add it to your shop. Incredibly easy print. The scale shown is 125%. 

DP's Most little baby knife

mini knife.stl

Crafted from the remains of a tree burned within a graveyard. A Grizzled Gnome original and my first sculpt in zbrush. 

Join memberships for more files, for commercial license, or just to support my work! 

Wand of the Undying

decrepid wand.stl

File free for a limited time. A little glue required with this model, but its absolutely worth it! I challenge someone to print it as big as they can! Current scale will work with a marble or the printable ball provided. Zero supports needed unless you print the ball. The "players" require a little glue to hold them into their spots, but you can set them up however you want! 

For more models and permission to sell prints remember to subscribe to memberships!!

Tabletop Foosball Table! 

fooze longer 2.0.stl

An easier and more relaxing version than the previous. Practice your putt anywhere!

To support me, get access to more models, or sell physical prints subscribe to memberships!

dont forget to like and share!

Practice putt hole version 2

putthole v3.stl

Free for a limited time, create your very own zapper in your favorite colors! Included is a two part base to display it on! I did is this way to make it easier to print on a standard size printer. The verison pictured was printed at 75% scale and feels just right. 

To support me, get access to more models, or sell physical prints subscribe to memberships!

dont forget to like and share!

Retro Duck Hunt Zapper! 

zapper body.stl

@grizzledgnome on tiktok! I've always wanted to make 3D models. To keep weekly free models coming remember to drop some likes! <3

This is a 0.28 layer height profile for TPU. You can use it as is for direct drive but can also be used for Bowden style you just have to increase the retraction to 6 mm.

This will work on many printers, Creality, Elegoo, etc. just start with a Creality Machine profile in Cura and then add the profile.

V1.7 TPU Cura Profile for Ender other Direct Drive/Bowden 3D Printers by CHEP

TPU_Test.stl

This HyperFast Profile (0.32 layer height) for Cura version 5.0+ is good for quick sample prints. With added .stl file.
Instructions:

Download the .3mf and open it as a project in Cura V5.0.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new V5.0 Best profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.

I've also added the .curaprofile for those who cannot load the .3mf

More details here: https://youtu.be/jM_jdsx5yFc



Ver4.0 Cura V5.0 Filament Friday HyperFast Profile by CHEP

FFV5.0-HyperFast-032.stl

This is an updated version of my ExtraFast Profile (0.28 layer height) for Cura version 5.0+. with added .stl file.
Instructions:

Download the .3mf and open it as a project in Cura V5.0.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new V5.0 Best profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.

I've also added the .curaprofile for those who cannot load the .3mf

More details here: https://youtu.be/jM_jdsx5yFc

Ver4.0 Cura V5.0 Filament Friday ExtraFast (0.28) Profile

FFV5.0-ExtraFast-028.stl

This is an updated Cura Good Profile (0.20 layer height) for Cura version 5.0+ with added .stl file
Instructions:

Download the .3mf and open it as a project in Cura V5.0+.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new V5.0 Best profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.

I've added the profile for those that cannot load the .3mf

More info in video: https://youtu.be/jM_jdsx5yFc

Ver4.0 Cura V5.0 Filament Friday Good (0.20) Profile

FFV5.0-Good-020.stl

This is my updated Cura Best Profile (0.12 layer height) for Cura version 5.0+. with added .stl file.
Instructions:

Download the .3mf and open it as a project in Cura V5.0.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new V5.0 Best profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.

More details here: https://youtu.be/jM_jdsx5yFc

Most recent

Make Anything