The Phone stand that folds up like a Soccer player!

Files ncluded for multicolor printing, or print each part separate and assemble with super glue and pieces of filament for the holes.

Instruction manual coming soon!

**Requires:**

- 3x [M3x20 Button Head Screws](https://amzn.to/3AvRd3H)
        - These can be 15-30mm in length if you already have M3 bolts.
- 1x [M3x10 Button Head Screws](https://amzn.to/3AvRd3H)
- 1x [Super Glue with Applicator Tip](https://amzn.to/3O24VPr)
- 1x Patience while assembling

**Print Settings:**

- Any Filament
- 0.2mm Layer Height minimum
- 3 Walls minimum
- Tree Supports

Suggested Filament:
- [eSun Green PLA+](https://amzn.to/3SYeim2)
- [Polymaker Wine Red PLA](https://amzn.to/48KyHBR)
- [Polymaker Yellow PLA](https://amzn.to/4dK8yV4)
- [Polymaker White PLA](https://amzn.to/3YTVxUw)
- [Polymaker Brown PLA](https://amzn.to/3YUCPfN)
- [Polymaker Biege PLA](https://amzn.to/3XezAhQ)


Soccer Foney

Left Arm.3mf

Hands down the best Phone Gaming Grip you can print. Flip over to use as a stand!
Prints great in PLA, but Jankmart reccomends PETG or ABS for durability and longevity.

**Requires:**
- 2x [Rubber bands Size 64](https://amzn.to/40akV9l)

**Instructions**
Prints in just 3 pieces!
- Use Tree supports for the handles, and no supports on the Center Slider.
- Slide center section on to handles, and use super glue to secure in place
   - if the center slider is not moving, try adjusting "filament flow" down by 0.02 increments
- Wrap Rubber bands around handles first as seen in the images
- Stretch bands over center section hooks
- Pwn n00bs

Phone Gaming Grip

Jankmart Phone Grip - Right Handle.stl

Nintendo Switch OLED Pipes Grip. 

Inspired by iconic Mario pipes, this grip stands out as one of the coolest ever printed. **Now with two piece handles for smaller printers like Bambu A1 and Prusa Mini!**

Printing Instructions:
- 0.2mm layer height
- Standard Organic/Tree Supports
- 3-4 walls is enough, more if you want HEFTY GRIPS


Nintendo Switch OLED Pipes Grip

OLED Pipe Grip STLs.stl

Protect your beautiful Nintendo Switch OLED Screen with this handy screen protector!

Printing Instructions:
- 0.2mm layer height
- Standard Print Strength
- Standard Organic/Tree Supports - snap off with sacrificial tabs.


Nintendo Switch OLED Screen Protector

Switch OLED Screen Protector.stl

Protect your Nintendo Switch Lite Screen with this handy screen protector!
Keeps your THumbsticks from getting jostled in your bag or on the go!

Printing Instructions:
- 0.2mm layer height
- Standard Print Strength
- Standard Organic/Tree Supports - snap off with sacrificial tabs.


Nintendo Switch Lite Screen Protector

SL Screen Protector.stl

Blurring the lines between 3D Printing, and product. 

[Come hang out on Discord! 🔗](https://jankmart.com/discord)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

A lot of people have been asking for an unsolvable maze and here it is. This maze has no solution, the maze pattern is a closed loop that has no end.

**If you like the design, don’t forget to like the design page and if you printed it, don't be shy - add a make to show off your creation!**

If you want to hear about upcoming designs, have a little sneak peaks and be a part of  a maze, puzzle and other brain teaser lover community, make sure to **[join Mazetropolis Facebook community](https://www.facebook.com/groups/1516788695908671)** . There will be a giveaway once we reach 100 members in the group. Be among the first ones and get the most out of it!

**It is important to follow the instructions of assembly process:**
1) take the "half-circle" connector pipes and push them into the smaller part of the case (they are both the same)
2) Once the connector pieces are pushed in the small case part as far as they go, take the small case part and slide it on the maze as far as it goes.
3) On the small case part there are holes, arrange them to face any path on the maze and use hook pieces and push them in all the way while the hook goes into the path of the maze.
4) Once that's done, take the larger case part and **make sure to arrange it correctly - make sure that the "TowerMaze ->" alligns with the end of the arrow on the small case part.**
5) Once you have made sure that the case is arranged correctly, push the case parts together - congratulations, you have assembled the Impossible maze and it is ready to prank your friends!

This design takes around 4 hours and 40 minutes to print and uses around 48 meters of material (Based on Bambu Lab's P1S default settings.

**Important: Change wall type to Arachne and do not use supports**



The impossible Maze Prank Maze

Imposib_maze_case_bottom_part.stl

This is a puzzle that forms a Bear once assembled correctly. The puzzle consists of base part and** 31 additional pieces that** have to be arranged and assembled to form a bear.

The print takes around **6 hours and 10 minutes** of total print time and it uses around 56 meters of material. Some parts require supports, but all parts are positioned for optimal printing.

**If you like the design, don’t forget to like the design page and if you printed it, don't be shy - add a make to show off your creation!**

If you want to hear about upcoming designs, have a little sneak peaks and be a part of  a maze, puzzle and other brain teaser lover community, make sure to **join [Mazetropolis Facebook community](https://www.facebook.com/groups/1516788695908671).** There will be a giveaway once we reach 100 members in the group. Be among the first ones and get the most out of it!

Low Poly Bear Puzzle - over 30 unique ieces

Bear_puzzle_base_part.stl

If you like Halloween and you enjoy a good brainteaser, this Halloween puzzle is just for you. A rather quick print that has more functionality than just looking cute - this puzzle consists of **18 unique pieces **that form a pumpkin once put together correctly. Additionally there is a connector piece and top part that can be added to finish the assembly. 

**A tip for those who print it: **When you want to connect the pumpkin with the top par, firstly put in the connector piece in the top part and push it against a table until it goes as far as it can and then take the assembled part and push it in the pumpkin.

The print takes around **4 hours of total print time** and it uses around **40 meters of material.** Some parts require supports, but all parts are positioned for optimal printing. 

**If you like the design, don’t forget to like the design page and if you printed it, don't be shy - add a make to show off your creation!**

If you want to hear about upcoming designs, have a little sneak peaks and be a part of  a maze, puzzle and other brain teaser lover community, make sure to join **[Mazetropolis Facebook community](https://www.facebook.com/groups/1516788695908671)**. There will be a giveaway once we reach 100 members in the group. Be among the first ones and get the most out of it!


Halloween Pumpkin Puzzle

Pumpkin_puzzle_piece_nr_1.stl

This year you can challenge Trick or Treaters with a challenge - if they want that free candy, they have to solve the Pumpkin maze to get their hands on the candy! This design combines Halloween with my TowerMaze design - the middle of the pumpkin is a maze and to open the pumpkin, you will have to solve the maze!

As always - the pumpkin maze has a built-in one-way closing path that enables you to reset the maze to a closed state. Use it as a maze, as a trick or treat basket or just as a Halloween decoration. 

**If you like the design, don’t forget to like the design page and if you print out Pumpkin Maze, be sure to showcase it by adding a make in the comments!**

**If you want to hear about upcoming designs, have a little sneak peaks and be a part of  a maze, puzzle and other brain teaser lover community, make sure to join [Mazetropolis Facebook community](https://www.facebook.com/groups/1516788695908671). There will be a giveaway once we reach 100 members in the group. Be among the first ones and get the most out of it!**

The pumpkin maze consists of 5 parts:
1) Pumpkin Shell
2) Pumpkin Maze
3) Top Pumpkin
4) Top holder
5) Connector piece

The size of the Pumpkin whole pumpkin maze is 20 cm (7.88 inches) squared.

The shell part takes 14 hours to print and uses 160 meters material
The maze part takes 6 hours to print and uses 54 meters material
The top pumpkin part takes 1 hour to print and uses 9 meters material
The top holder part takes 1 hour to print and uses 4 meters material
The connector  part takes 25 minutes to print and uses 2.5 meters material


Pumpkin Maze - solve for candy!

Pumpkin_maze_pumpkin.stl

Building blocks and brainteasers are something that I loved playing with as a child and by combining these two things, I came up with the idea of the Pyramid puzzle. This puzzle consists of multiple parts and when they are put together correctly, a Pyramid is formed. This might seem very easy, but It is more difficult than you would expect! 

This is Pyramid puzzle nr 3 and it consists of 17 unique pieces. That might seem low, but trust me - it’s plenty of challenge to fit them all together in a perfect cube!

If you like this design don’t forget to like the design page. If you like the design, but don’t want to download it yet, be sure to add it to “collections” to not forget about it. And if you print it out, don’t forget to add a make and show off your pyramid puzzle nr.1.

Pyramid puzzle nr 3 takes around 5 hours of total print time and uses 55  meters of material (based on printing on default settings of Bambu Lab P1P printer). All parts are rotated for the optimal print speed (some of the pieces require the supports, but all supportable faces are flat)

**If you want to hear about upcoming designs, have a little sneak peaks and be a part of  a maze, puzzle and other brain teaser lover community, make sure to join [Mazetropolis Facebook community](https://www.facebook.com/groups/1516788695908671). There will be a giveaway once we reach 100 members in the group. Be among the first ones and get the most out of it!**


Pyramid Puzzle Nr. 3

Pyramid_puzzle_nr_3_piece_nr_1.stl

I am a 3D designer who specializes in creation of all sorts of different mazes, puzzles and other brainteasers with an occasional fidget toy mixed in between. Consider becoming a member to get full access to my designs! 

Join the Facebook group - be among the firsts to get early access and sneak peaks of future designs.

https://www.facebook.com/groups/1516788695908671

Once we reach first 100 members in the Facebook community, there will be first of many giveaways, so don't miss out, join now!

Most recent

jankmart