This is a simple holder for a tube of Hydralyte hydration tablets.

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes w

This is a mashup of hein's desk clamp and Gridfinity. I replaced the top piece of the clamp with Gridfinity baseplates. I made 2 versions. The first version is a simple 1U high baseplate with holes f

1x2 Gridfinity Arduino Adapter Plate v18 For this part, you will need to print 2 x 1x2 Support v18. These I will be glueing to the adapter plate and insert 4x heat set threaded inserts to attach t

1x2 Gridfinity Arduino Adapter Plate v18 Sorry to double this up but I uploaded the model just prior to the final V18 edit. This is the correct version For this part, you will need to print

Legs for your Gridfinity Bases. Have screw holes on top and bottom so that Gridfinity Baseplates can be securely mounted to them. Bottom of legs fit into GridFinity Bases, so you can stack them. B

NOTE: nothing to do with HSW (Honeycomb Storage Wall) ; these are just Gridfinity cups with honeycomb walls with metrics designed to minimize material. Inspired by a question in the Gridfinity d

Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6443026. These are 1x2 gridfinity baseplates. There is one flat one and the rest are at angles, in 5º increments up to 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6443037. These are 1x2 gridfinity modules. Their main function is to be a tall, angled baseplate. But, they also have a

I've put together a few simple Gridfinity blocks for storage drives. A lot of us have tons of old drives sitting around - better to store them securely for future projects. There are 3 sizes, which a

Turn Bearded Printer's epic RPG organizer into a Gridfinity grimoire! This is a mod kit for the following (paid) model: https://thangs.com/designer/Bearded%20Printer/3d-model/Dungeon%20Master%20Tome%

Store 13 Needle files (handles around 5mm) vertically in a 1x1 gridfinity cube. Relatively high center of gravity, so you may want to use magnets on a weighted base, I'm just yoloing it until _a frien

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6443030. These are 1x2 gridfinity modules. Their function is to be an angled baseplate. They are low, but they will sti

As a woman of a certain age, I realized that my TUSH needs a little extra support. I tried supporting my TUSH with [conventional methods](https://www.thing

Gridfinity Mechanical Keyboard Switch Bin / Keyswitch Tester Store and organize your mechanical switch samples, use as a switch tester. Compatible keycaps at https://github.com/dennisleexyz/keycaps

The Transport Tray Handle has been slimmed down as the previous iteration was over-engineered. This part now fits the Gridfinity Transport Tray with 0.01mm tolerance built in to reduce sanding and fin

A 1x3 Gridfinity box to store the SOG powerpint multitool. Plenty of space around the tool so it can easily be removed. Printing I sliced in Cura using a fast print gridfinity profile based on so

A 1x3 Gridfinity box to store the Leatherman Curl multitool. Plenty of space around the tool so it can easily be removed. Printing I sliced in Cura using a fast print gridfinity profile based on some

Gridfinity is great, especially for items that you leave out for easy access. But what about items that you need to put away, or carry to a work area? What you need is a set of Gridfinity Storage

URRRNN!!! This is a 2x2 storage bin great for when you really want to slam things down onto your Gridfinity baseplates. Thwomps can be stacked onto other Thwomps and can even wear other Gridfini

This is part of my Gridfinity Paint Stuff collection. I've been wanting some Gridfinity-based organization for my paint area, so I made some stuff. This is a paint brush holder I made for when I'm ac

This is part of my Gridfinity Paint Stuff collection. I've been wanting some Gridfinity-based organization for my paint area, so I made some stuff. These are holders for 2oz acrylic paint bottles - t

Gridfinity Buildplate for a Cheaper Screw A version of the Gridfinity Buildplate for those who don't want to play around with weights and rubber, and just want a fast, cheap screw. It takes half the

This is an exploded template of the components required to assemble a Gridfinity design by Zack Freedman. It is used with a CAD program to select, copy and assemble what is needed to create a Gridfin

This is part of my Gridfinity Paint Stuff collection. I've been wanting some Gridfinity-based organization for my paint area, so I made some stuff. These are simple little palettes for paints of all

I am very excited to introduce to you the Rolling Gridfinity Octofinity Storage box. This design was inspired by the video that Zack Freedman(https://than.gs/u/76763) did covering 3DPrinty's(https://t

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6065920. This 1x1 gridfinity module holds a stack of 20 6x2 magnets inside. Roll the thumbwheel and one magnet at a time

Put a Raspberry Pi 400 on your Gridfinity. It's 80x better than a Pi 5. That's just math. Read a book. This should also fit an Orange Pi 800, which is 160x better than a Pi 5! You can glue the halv

This is part of my Gridfinity Paint Stuff collection. I've been wanting some Gridfinity-based organization for my paint area, so I made some stuff. This is a really simple holder for a standard sized

Socket sizes are based on a set of Crescent tools I received when I was 16. I'm not sure if they will match your diameter. BUT! the fusion files are here so you can make them how you want! Socket siz

This is a different take on Ink Pad storage for Papercrafting. Ink pads are 34mm square, so they fit nicely in a 42mm Gridfinity grid. This model is a holder that fits on a 4x4 Gridfinity space, and

| Visit JERRARI3D.com for Instructions and a complete look at the GEN2 collection The GEN2 Decor Series is the next

Based of the work of Zack Freedman and nolanleot here on Thangs. I include the Fusion 360 Files that also include the "blank" from nolanleot so you can more easily modify to your needs. quote from n

Continuing my series of dryerase supply holders for Gridfinity, this is a 1x1x6 Gridfinity block that packs in drops for 5 U Brands dryerase markers. These markers have an oval cross section, allowing

I have continued to kitbash an Arduino Uno Lab/Work Station/Learning Station that works for me in the Gridfinity system. This works for me because I am constricted to an Ender 5 Pro build plate of

This is part of my Gridfinity Paint Stuff collection. I've been wanting some Gridfinity-based organization for my paint area, so I made some stuff. This is a really simple holder for a pair of standa

Socket sizes are based on a set of Crescent tools I received when I was 16. I'm not sure if they will match your diameter. BUT! the fusion files are here so you can make them how you want! Based of t

Based of the work of Zack Freedman and nolanleot here on Thangs. I include the Fusion 360 Files that also include the "blank" from nolanleot so you can more easily modify to your needs. quote from n

Remix of IKEA Rajtan holder from TommyUnreal on Printables, but made compatible with Gridfinity (by usisng

This is a blend of the arm piece from the VESA stand by bzrko on Thingiverse with a Gridfinity 1x1 bottom by ZackFreedman on Thangs. You will need to mount it to a Gridfinity baseplate, 5x5 or larger

Gridfinity tray with magnets in tray bottom to hold loose parts or any magnetic item. 2 x 2 x 4 Gridfinity bin with voids for 25 6mm x 2mm to be embedded in the base. Great for holding loose screws,

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four size

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes w

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four size

This 1x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes w

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four size

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes w

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four size

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes w