Mount your EK XRES 140 D5 res-pump combo [https://www.ekwb.com/shop/ek-xres-140-revo-d5-pwm-incl-pump](url) inside your Meshify 2 Compact case [https://www.fractal-design.com/products/cases/meshify/meshify-2-compact/black-tg-light-tint/](url) on the internal SSD brackets.

Note that I probably screwed up a measurement somewhere so the right mount doesn't quite fit, but it's very sturdy anyway. You can use the thumb screws to attach these to the inside.

The pattern was supposed to align with the pattern in the case, but it doesn't line up perfectly. Still looks pretty good imho


This spawned out necessity when I thought it would be a good idea to build a custom hardlined water loop in my Meshify 2 compact for my CPU and GPU. It's certainly a tight squeeze, but works anyway.

I also designed a lower panel with passthrough for a watercooling pipe. It should attach just like the OEM panel, but has the mesh pattern. It fits a rubber watercooling grommet that I harvested off my old CoolerMaster HAF 922 Case [https://www.coolermaster.com/catalog/legacy-products/cases/haf-922/](url)

Meshify 2 Compact Resivoir Pump Combo Mount and Passthrough

SSD Sled to EK XRES 140 Revo Mount - Left (meshed)

Meshify 2 Compact Replacement Lower Panel - meshed with watercooling passthrough.stl

When you fit into the intersection of:
1.  Needing to attend a blacktie wedding,
2.  Are too lazy OR don't care enough to order/buy a set of tuxedo studs, and
3.  Have a 3D printer at your disposal
This is the model for you.

Inspired by The Tuxedo studs by JD2jr here: [https://www.thingiverse.com/thing:2812923](url) that I was having trouble printing, these can be printed fat-side-down so you can transfer any surface finish (I'm looking at you, diffraction grating sheets (I my usual mirror/glass)).

These studs print perfectly fine (at least on my Artillery Sidewinder X1) without supports.

They are 10mm in diameter at the front, with a slight bevel to a 9mm actual front surface. The thin back side is 8.5mm so they may fit through the shirt button holes.

Hope this helps out some wanna-be-penguin (like me) ;-P

Tuxedo Studs - 10mm


This will fit 9 Volcano nozzles. The heads sit above the platform for better grabability, but below the upper lip so you can stack blocks on top. 

From Zack Freedman:
Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at <https://bit.ly/3E2NxnZ>

**Gridfinity Tips!**

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

[Description updated due to issues with URLs]

Volcano Nozzle x9, Gridfinity 1x1


This will fit 9 Volcano nozzles. The heads sit above the platform for better grabability, but below the upper lip so you can stack blocks on top. 

From Zack Freedman:
Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](url)

Parametric source file [https://a360.co/3KZAXs6](url)


**Gridfinity Tips!**

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Volcano Nozzle x9, Gridfinity 1x1x.5.stl

This will hold your Pinecil v2 and 5 TS100 Tips in a 1x1 #gridfinity box.

The design is remixed from the work by Waschtl <https://www.printables.com/social/308935-waschtl> found here 
<https://www.printables.com/model/266923-gridfinity-pinecil-tip-holder>

The tolerances were just a bit too tight for me and it took too much force/filing to get things to fit without modification.

From Zack Freedman:
Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at <https://bit.ly/3E2NxnZ>

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

**Gridfinity Tips!**

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

[The description was updated due to issues with the URLs]

Gridfinity Pinecil & Tip Holder with some tolerance.stl

This will hold your Pinecil v2 and 5 TS100 Tips in a 1x1 #gridfinity box.

The design is remixed from the work by Waschtl [https://www.printables.com/social/308935-waschtl](url) found here 
[https://www.printables.com/model/266923-gridfinity-pinecil-tip-holder/comments](url)

The tolerances were just a bit too tight for me and it took too much force/filing to get things to fit without modification.

From Zack Freedman:
Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](url)

Parametric source file:
[https://a360.co/3KZAXs6](url)

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

**Gridfinity Tips!**

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Stash your measuring bois on your Gridfinity modular workshop storage system, Excalibur style.

Remixed from Zack Freedman's design for the Mitutoyo Absolute Digimatic Series 500 here <https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Caliper%20Holder-62216>
I don't have the scratch (or need) for that bougie-level caliper, so I made a few adjustments to fit my cheap Husky 6in calipers. The dimensions are ever so slightly wider since it looked to be slightly too small. Turns out that my changes may have been unnecessary given that someone had commented that the original worked great.... all that work for naught?

#Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](url)

Zack's parametric source file:
<https://a360.co/3KZAXs6>

My design stores a Husky 6in caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6" and maybe other sizes?

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

Gridfinity Tips!

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

[Description edited due to broken URLs]

Caliper Holder, Husky 6in, Gridfinity 1x2

Stash your measuring bois on your Gridfinity modular workshop storage system, Excalibur style.

Remixed from Zack Freedman's design here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Caliper%20Holder-62216 
It probably wasn't necessary, but I made a few dimensions ever so slightly wider.

#Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file:
https://a360.co/3KZAXs6

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

Gridfinity Tips!

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Caliper Holder, Husky 6in

Store 13 Needle files (handles around 5mm) vertically in a 1x1 gridfinity cube. Relatively high center of gravity, so you may want to use magnets on a weighted base, I'm just yoloing it until _a friend_ knocks it over and spills it everywhere

Derived from Zach Freedman's parametric #Gridfinity modular workshop storage system

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at <https://bit.ly/3E2NxnZ>

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

**Gridfinity Tips!**

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.

[Description updated due to issues with URLs]

13 Needle File Holder, Gridfinity 1x1

Store 13 Needle files (handles around 5.5mm) vertically in a 1x1 gridfinity cube. Relatively high center of gravity, so you may want to use magnets on a weighted base, I'm just yoloing it until _a friend_ knocks it over and spills it everywhere

Derived from Zach Freedman's parametric #Gridfinity modular workshop storage system

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file:
https://a360.co/3KZAXs6

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

Gridfinity Tips!

All storage blocks are compatible with all baseplates!
Most storage blocks are stackable!
You can add 6x2mm magnets to the corners! They won't magnetize the contents.

As my username points out, I'm usually _up all night_ working on any number of thangs...

If you feel the desire to contribute to my caffeine habit keeping me upaulnight designing and sharing things, feel free to [buy me a coffee](https://www.paypal.com/donate/?business=L8CXXNMS3A8X2&no_recurring=0&item_name=Buy+me+coffee+so+I+can+stay+upaulnight+to+keep+designing+and+developing%21%E2%98%95&currency_code=USD)

I'm also over at thingiverse:
https://www.thingiverse.com/upaulnight

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

upaulnight

Achievements

Seedling

Explorer