Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2662752.
update: 05.10.2019 added also a 12mm extra version for the bottom legs on request to have space to hide a battery pack.
update: 04.10.2019 added 25mm extra to the bottom legs on request to have space to hide a battery pack.
The original was impossible to print with all the support needed, so i created a new version where there are 6 individual pieces. only the legs need a tiny amount of support (print these standing with a skirt with a size of 10 outlines to prevent it from falling over or moving too much)
i havent got as far as installing any lithophanes and lighting but will do that soon.
I have a 140x140x140 bed, so these STL files uploaded will give you a lithophane size of around 113.4mm
instructions: 1.Turn the cover 180degrees so it lays flat 2. create 4 sockle_legs print it standing.
you can print it with .3 or .2 and a 30-40% infill only the sockle_legs need support and a skirt of at least 10 outlines
if you have a larger printer, you can offcourse scale up everything and measure the distance yourselve.