tracking pixel
DT

Wheel Bushing for Husqvarna HU700H Push Lawn Mower

by
rebeltaz
Follow
Follow
Remix Model
Wheel Bushing for Husqvarna HU700H Push Lawn Mower 3d model
Wheel Bushing for Husqvarna HU700H Push Lawn Mower 3d model
2D
3D
Makes
Be the first to upload a Make
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4044455.

So, in my continuing line of "no one else will ever need this" crap, I present to you the front wheel bushing set for a Husqvarna HU700H push mower, part number 532439077 (#85 on the diagram, called BRACKET.FRT.AXLE.SUPPORT by the manufacturer). You will need one set for each side. There is only one screw holding this bracket in place - even the diagram only shows one screw per side - but I would highly suggest using a second screw on the other side. The holes are already there, so it just makes sense to screw both pieces.

This prints best in the orientation presented - with supports enabled - and I would recommend a durable material. I used PETG, but maybe even carbon fiber would be good/better? You may want to carefully drill out the screw hole just to make it round since at 0.2mm they don't come out perfectly round. Just don't enlarge it any. I recommend at least 1.6mm walls (4 wall using a 0.4mm nozzle) and a high infill - I used 70% triangle infill.


NOTE Due to either a Thingiverse bug or (more likely) shadowbanning, my models no longer show up under the [Newest] listings. If you want to see more of my models, please be sure to 'follow' me. If you print this, it would really help if you'd post a 'make' so that others could find this model.


0 Likes1 DownloadsApril 26, 2022


0 Likes1 DownloadsApril 26, 2022
This model is restricted by licensing terms.