tracking pixel
DT

Cake Decorating Piping Tip Organizer Case

by
rebeltaz
Follow
Follow
Remix Model
Cake Decorating Piping Tip Organizer Case 3d model
2D
3D
Makes
Be the first to upload a make
This model is restricted by licensing terms. 
1 Likes2 DownloadsApril 26, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3476708.

I bought this cake decorating set for my girlfriend for Valentine's Day. While it does come with a case for the tips, it is set up in such a way that two tips go into each divided section. When you turn the case upside down, or even tilt it slightly, the tips go every which way.

To fix this, I thought maybe putting each tip into it's own section would solve the issue, and it did. This led to another problem, though. We couldn't get our fingers down into the sections to grab hold of the tips. Well, that wasn't going to work.

I had added cones for the tip to sit on in the original design, and I noticed that the tips weren't really going anywhere anyway. I cut the walls down and sure enough, the tips stayed put, even when the case was turned upside down.

I've included all three designs here - full dividers, half height dividers and no dividers. For the intended purpose - holding the piping tips, I suggest either the _lowdivider or the _nodivider version. If you need a storage case for other small objects, you could modify the _talldivider model to eliminate the cones.

For the hinge, I used a coat hanger that I straightened out and slid through the holes. The one I used is a snug fit and it stays put while allowing the lid to move freely, but I found another coat hanger that was a little more loose and was liable to slip out more easily. You may want to print the hinge_test file first to see the size wire you'll need.

-=[ EDIT ]=- As per request, I have added a _nodivider and _lowdivider version to fit PME tips that are 0.5cm taller.

NOTE Due to either a Thingiverse bug or (more likely) shadowbanning, my models no longer show up under the [Newest] listings. If you want to see more of my models, please be sure to 'follow' me. If you print this, it would really help if you'd post a 'make' so that others could find this model.


Another Sketchup Model - Debunking the Myth that Sketchup is Useless in 3D Printing


1 Likes2 DownloadsApril 26, 2022




This model is restricted by licensing terms. 
1 Likes2 DownloadsApril 26, 2022
This model is restricted by licensing terms.