Upload for Search
Search By Text
Upload for Search
Search By Text
James W

Idler Pulley for 624 Bearing and GT2 belt

by

peaberry

Follow
Follow
Like
Idler Pulley for 624 Bearing and GT2 belt by peaberry full viewable 3d model
Loading preview...
0 Likes5 DownloadsJanuary 24, 2022

This model is restricted by licensing terms. 

Community Uploads

No photos added yet, be the first to upload a photo!

This model is restricted by licensing terms. 

0 Likes5 DownloadsJanuary 24, 2022

Community Uploads

No photos added yet, be the first to upload a photo!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2424284. This is an idler pulley to suit a 624 bearing (4x13x5mm). The pulley outer diameter is 18mm, internal diameter 13mm and overall height is 8.4mm. The pulley outer channel is 6.4mm high by 1.5mm deep. Assemble with a 624 bearing, M4 machine screw and an M4 washer to give some clearance for the bearing to rotate. I made this pulley to stop the belt from slipping off the bearings in this drawing robot: https://www.thingiverse.com/thing:1517211 There's also a spacer included with 8mm OD x 4mm ID x 3.5mm height, which was needed with the drawing robot, to add a bit of clearance to fit the new pulleys.




0 Likes5 DownloadsJanuary 24, 2022

This model is restricted by licensing terms. 

Community Uploads

No photos added yet, be the first to upload a photo!

This model is restricted by licensing terms. 

0 Likes5 DownloadsJanuary 24, 2022

Community Uploads

No photos added yet, be the first to upload a photo!