Now it's getting serious people :D We have designed a beautiful lily plant including a pot. I have to admit that this print will be a little harder for complete beginners, but it is doable.

The pot and plant stakes are no problem. Everything printable without support. The flowers are difficult. Printing the flowers is easy, but removing them from the support takes some time.

But if you approach it carefully with a spatula or simple needle-nose pliers, you will be able to do it effortlessly. We have planned 9 extra. 7 are needed. If 1 or 2 break, you have some in reserve

Did you know that there are 125 different species of monkeys? I'm curious to see how you'll paint the flowers. We'll start painting our version from Google right now :D

We recommend gluing the flowers with glue or a hot glue gun

EASY PAINTING SYSTEM We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function

---

DISCORD We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together.

The invitation comes immediately with access to our exclusive design.

---

Print parameters. We recommend: BLOSSOM:

first layer height 0.16mm (If someone wants something a little finer, then with 0.12) layer height 0.16 mm (If someone wants something a little finer, then with 0.12) Wall lines: 3 Fill density: 15% Support: yes, tree support Disable independent support structure layer height when enabled (not that important, but recommended) PLANT STAKES:

first layer height 0.16mm (If someone wants something a little finer, then with 0.12) layer height 0.16 mm (If someone wants something a little finer, then with 0.12) Wall lines: 3 Fill density: 15% Support: No PLANT POT:

first layer height 0.16mm layer height 0.16 mm Wall lines: 3 Fill density: 10% Support: No

To easily remove the support structure, we recommend using pointed pliers. This makes removal much easier than by hand. Please be careful with your hands, otherwise they may break

We also provide a 3MF file with the recommended settings. We created the 3MF file via Bambu Studio. We therefore recommend the 3MF file only for Bambu Studio users