This holiday season has been absolutely insane, and I have not had a spare moment to print new designs, so I asked you all how you'd feel if I released models that I haven't actually printed yet, and the response was 100% positive. This will not be the new norm. I will continue printing and testing new models going forward, just need to get through the holiday craziness first!
That being said, not having to print and photograph models will allow me to get new models out to you all much faster and more often. This planter uses the same twist lock design as my others, it's just a different shape and design, so I'm fairly confident in the print settings even though I haven't had a chance to print it yet.
This design is just the smaller, 2.75" size (both wall mounted and tabletop) for now. I'll add a 4.5" size soon.
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.
Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.
Print Settings .2mm layer height 15% grid infill 2 walls
Filament & Hardware Filament I used for this print: Overture Matte Light Brown PLA Hardware: #10-12 x 1-1/4 in screws
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods