gazzaladra

Hanging Planter

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
|
Image 1 of 10
Hanging Planter 3d model
gazzaladra
gazzaladra
|
Image 1 of 10
Hanging Planter 3d model
2D
3D
Makes
Hanging Planter 3d model
Hanging Planter 3d model
Hanging Planter 3d model
Hanging Planter 3d model
Hanging Planter 3d model
Hanging Planter 3d model
Hanging Planter 3d model
Hanging Planter 3d model
Hanging Planter 3d model
Hanging Planter 3d model
This model is restricted by licensing terms. 

A creative hanging planter for your home or garden.

What you need:

  • The 3d printed thing
  • Yarn with about 3mm in diameter (can be flax, hemp, whatever)

The assembly instructions are in the images.

Size: 90 × 80 × 170 mm

Print settings Required build volume: 90 x 90 x 180 mm Material usage: 110g Print time: 10h

Material: PLA Print direction: stl is rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm – 0.28 mm Outer walls: 3 Infill: 15% Build plate adhesion type: brim

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.


17 Likes58 DownloadsJune 5, 2023


17 Likes58 DownloadsJune 5, 2023
This model is restricted by licensing terms.