Horizontal Rewind Spool Holder
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4346450.
This is a horizontal auto rewinding spool holder, which uses the rewinding clutch systems from the Universal Auto-Rewind Spool Holder (https://www.thingiverse.com/thing:3338467).
I have split the hub into 3 pieces to make for easier printing. To hold the 3 pieces together, you will need 8 m4 x 8mm tapered head screws. Approximately 70 6mm ball bearings to run in the race between the hub and the base, and finally two 608 bearings (e.g. 608ZZ or 608RS) for the spool hub.
If you have any desired changes, customizations, etc let me know.
PS. the bearing race has been positioned to provide a decent amount of plastic around the outside, without making the diameter excessively large. Testing this arrangement and may increase the diameter of the bearing race if problems are found.
Auto-Rewind Spool Holder for Spannerhands Spool System (MM)
Spool Plug: Horizontal Filament Spool Holder
Parametric Spool Nut for the Universal Auto Rewind Spool Holder
Wire shelf hanging spool holder for Filler spool holder
Spool-Core for my Spool-Rewinder utilizing a Bambulab AMS-Lite Spool-Holder
Horizontal Spool Holder 608
Auto-Rewind Spool Holder - T-slot mount
Horizontal Spool Holder using BBs as rollers.
Horizontal Spool Holder on Smooth Bearings
2020 Spool Holder Horizontal Position
Auto-Rewind Spool Holder - Plain Dial
Large horizontal filament spool holder (v-core 4 leftover bearings used)
#TidyDesk Headphone and phone holder. Horizontal phone holder iteration 4, original 16
#TidyDesk Headphone and phone holder. Horizontal phone holder iteration 3, original 15
#TidyDesk Headphone and phone holder. Horizontal phone holder iteration 2, original 18
Bambulab A1 Spool Holder Holder
Gridfinity Spool Holder with Spools
Threaded spool for Wire Spool Holder
#TidyDesk Headphone and phone holder. Vertical and horizontal phone holder 3 original 19
