Upload for Search
Search By Text
Upload for Search
Search By Text
Scott M

Set of 3 Spinning Tops

by

dazus

Follow
Follow
Like
Set of 3 Spinning Tops by dazus full viewable 3d model
Loading preview...
4 Likes24 DownloadsNovember 13, 2021

This model is restricted by licensing terms. 

Community Uploads

No photos added yet, be the first to upload a photo!

This model is restricted by licensing terms. 

4 Likes24 DownloadsNovember 13, 2021

Community Uploads

No photos added yet, be the first to upload a photo!

The designs of these tops create interesting patterns as they spin. Those patterns change based on the speed of the top and the angle you look at them. Try swapping colors during the print to bring out the patterns in the tops. I've included files with and without built-in supports. I find they print easily and separate cleanly using the supports, but different slicers, printers and print settings may produce different results. If you print the version with supports and use the recommended settings, you won't need infill or additional supports. I find that the tip prints better without a raft. If the tip of the top isn't a part of the first layer, lower the model below the print bed a layer, then slide it again. **PRINT SETTINGS** * Print outer walls before inner * Print slowly. I use 30mm/sec outer wall, 40mm/sec inner wall, and 60mm/sec overall print speed. * Wall thickness 4.0mm (NOT a typo). You want the top to be solid and I think it works better if all the layers print radially (as walls) rather than linearly (as infill) * Infill: none, unless you don't make the walls thick. Then, you'd need infill to be 100% * Temp: lower print head temp will give you a better finish on the bottom of the top. Exact temp will vary with filament.
CategoryHome & Garden




4 Likes24 DownloadsNovember 13, 2021

This model is restricted by licensing terms. 

Community Uploads

No photos added yet, be the first to upload a photo!

This model is restricted by licensing terms. 

4 Likes24 DownloadsNovember 13, 2021

Community Uploads

No photos added yet, be the first to upload a photo!