These are planters designed in Fusion360!

This is a planter or vase with an fluid, modern pattern. This prints great in vase mode or with walls, and looks awesome in a semi-transparent filament!

If you print this in vase mode and want to fill with water, I'd suggest lining the base with silicon sealant to avoid trickling leaks. I've had good luck with Gorilla Waterproof Patch & Seal Rubberized Sealant Spray (Crystal Clear)

**printing**
- There are 2 files to print
- 1 with drainage holes and 1 without.
- I suggest the one with drainage holes if you're going to put soil in it
- You should be able to print this in most layer heights, but the pictures are using a 0.16 layer height!

Want to sell this print? Become a member today!

Fluid Planter

Pot  - Fluid - Drainage Holes.3mf

This is a vase with an wavy pattern. This prints great in vase mode or with walls, and looks awesome in a semi-transparent filament!

If you print this in vase mode and want to fill with water, I'd suggest lining the base with silicon sealant to avoid trickling leaks. I've had good luck with Gorilla Waterproof Patch & Seal Rubberized Sealant Spray (Crystal Clear)

printing
- There are 2 files to print 
- 1 with a flat bottom and 1 with a concave bottom to help prevent water rings.
- The one with a concave bottom should be printed with supports
- You should be able to print this in most layer heights, but the pictures are using a 0.16 layer height!

Want to sell this print? Become a member today!

Vase Waves

Vase - Waves - Raised Bottom.3mf

Vase - Waves - Standard.3mf

This is a planter or vase with an organic pattern. This prints great in vase mode or with walls, and looks awesome in a semi-transparent filament!

If you print this in vase mode and want to fill with water, I'd suggest lining the base with silicon sealant to avoid trickling leaks. I've had good luck with Gorilla Waterproof Patch & Seal Rubberized Sealant Spray (Crystal Clear)

**printing**
- There are 2 files to print
- 1 with drainage holes and 1 without.
- I suggest the one with drainage holes if you're going to put soil in it
- You should be able to print this in most layer heights, but the pictures are using a 0.16 layer height!

Want to sell this print? Become a member today!

Organic Planter

Plant Pot - Organic - Vase.3mf

Plant Pot - Organic.3mf

This is a spiral planter that would fit a succulent or some flowers. I recommend fuzzy skin to get the texture in the pictures! I used 0.3 point distance and 0.1 skin thickness. You can print this at any layer height, but the pictures show it at 0.24mm.

You can scale this model up or down as needed, it shouldn't introduce any structural issues. 


Want to sell this design? Become a member today!

 
Happy printing!

Planters

Categories:

Tags:

Models in this collection

Fluid Planter

Vase Waves

Organic Planter

Spiral Planter