By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
This is the Piston Cup from Cars. This model is splitted, rotated for optimal printing and lowest amount of supports needed.
The rod and 2 wings need a little but of support, as shown in the picture below.
I recommend hand painting the supports onto the model and use Slim tree supports. If you have a bed slinger a brim is usually helpful.
The tallest part is ~ 152 mm. I printed this with 2 perimeters, 15 % infill and the model takes around 275 g of filament (total without flush).
Paint the piston in the according color or if you have a Bambu Printer, I included the .3mf for the project. I recommend using a Silk Gold Color. I used Bambu Lab Silk Gold: https://shrsl.com/4eafw (Aff. Link)
Assembly is pretty straight forward, parts should be glued together (e.g. super glue) but have a slight press fit connection.
