Werner F
Werner F

Asuma Sarutobi Chakra Blade

by
WF3D
WF3D
WF3D
WF3D
|
Image 1 of 5
Asuma Sarutobi Chakra Blade 3d model
WF3D
WF3D
|
Image 1 of 5
Asuma Sarutobi Chakra Blade 3d model
2D
3D
Makes
Asuma Sarutobi Chakra Blade 3d model
Asuma Sarutobi Chakra Blade 3d model
Asuma Sarutobi Chakra Blade 3d model
Asuma Sarutobi Chakra Blade 3d model
Asuma Sarutobi Chakra Blade 3d model

Asuma Sarutobi Chakra Blade

The knife is approximately 270 mm long and should fit on most build plates (diagonally).

I have provided several different versions:

"Flat" - for the best print result on most FDM printers

"Pointy" - a more accurate version as the blades usually don't have an even thickness. If you print that on a regular FDM you will have little steps on the top surface.

Both versions are available in a combined and split version. Use whichever you prefer. The holes have a diameter of 22 mm. If you have bigger or smaller fingers, you will need to scale the knife accordingly.


8 Likes6 DownloadsJune 4, 2024
This model is restricted by licensing terms.