Lock S-foils in attack position—this starfighter is ready for action! 🚀

Here’s my latest glowing design, inspired by one of the most iconic starfighters in sci-fi history: the legendary X-Wing. I wanted to capture its fast, agile silhouette in a sleek, minimalist style—something that looks like a tactical display from a Rebel briefing room.

By day, the clean lines make for a crisp, modern aesthetic. But in the dark, the design truly shines—giving off a glowing holographic effect that feels right at home in a galaxy far, far away.

Would you want to see more ships in this style? Let me know in the comments! And may the glow be with you. ✨🔥

🎨 These are the filaments I've used

• Bambu Lab Basic PLA Black
• Bambu Lab Basic PLA Glow

Print and assembly instructions

Geometric Art

• 0.20 layer height
• Wall Generator: Arachne
• Top surface pattern: Monotonic
• Infill: 15%
• Color change at layer 21 (4.20mm)

Frame

• Wall Generator: Arachne (otherwise the chances of the print-in-place latches fusing to the frame are higher)
• Infill: 15%
• To loosen the latches move them up a bit before turning them
• Use the latches to secure the artwork into the frame (TIP: add a strip of tape to the back of the artwork where the latch will hold if the latch is too loose)
• When you use the wall hook, make sure you turn the latch under the hook to the locked position before installing the wall hook. Slide the artwork under the locked latch first, position it into the frame and close all other latches

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.