Pendulum is a compact table lamp built around a clean dome shade, a deep green base, and a gold silk accent that swings over the top like a suspended frame. The shape is simple, but that curved ring changes the whole silhouette and gives it a very distinct presence once assembled.

The contrast does most of the visual work here. The white shade keeps the top soft and diffused, the dark green body grounds it, and the gold silk halo ring adds a brighter accent without turning it into a flashy print. It is based on a lamp from Poland, and that influence comes through in the balance between the rounded shade and the arched detail.

Printing notes

This model is designed around a 60mm diameter, 8mm thick LED puck. The shade is the key visual piece, so a clean white filament works best there. Silk gold suits the halo ring nicely and helps separate it from the rest of the body. Dry filament and steady outer walls will help keep the visible surfaces looking clean.

Colors used

• White (Bambu Lab Matte PLA White)
• Gold (Tinmorry Silk PLA Gold)
• Dark green (Prusament PLA Opal Green)

Filaments

• Bambu Lab Matte PLA White
• Tinmorry Silk PLA Gold
• Prusament PLA Opal Green

Assembly

Both cap parts are secured with magnets, four in each half. Each cap is labeled “F” (front) or “B” (back), and the halo ring is marked the same way on both sides to guide assembly. Slide the two cap parts through the slot in the halo ring until the magnets pull them together.

The halo ring is press-fit into the base. When installing it, ensure the “F” side is facing the front.

Hardware / extra parts

• 1 x LED puck, 60mm diameter, 8mm thick

  • Available on AlieExpress: https://s.click.aliexpress.com/e/_c3tXa7C9 (affiliate link)

• 8 x round 6mm x 3mm magnets (glued into the caps)

  • Available on AlieExpress: https://s.click.aliexpress.com/e/_c2RonMwV (affiliate link)

A nice one to keep simple on the color side. If you print one, post a photo, would love to see your version.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.