Profile Image
TheCraftyMaker
TheCraftyMaker

TheCraftyMaker

My name is Christof and I'm located in Belgium. I'm a professional software developer and maker in my spare time. I design practical and fun 3D models for 3D printing and fiddle with electronics. I also love to play piano & have a serious Lego addiction.

Linktree

Follow

Select a membership plan

15% off
The Crafty Family
$4.25
/ month
when billed annually

Welcome to the family. With an active The Crafty Family subscription you'll gain access to:

  • Subscription-only designs in addition to all other free designs available on The Crafty Maker catalog.
  • Monthly designer updates
15% off
The Crafty Companion
$8.50
/ month
when billed annually

Welcome companion. With an active The Crafty Companion subscription you'll gain access to:

  • Subscription-only designs in addition to all other free designs available on The Crafty Maker catalog.
  • A commercial license to legally sell 3D prints created from the designs available on The Crafty Maker catalog. Active subscribers are licensed to sell these prints on any platform of their choice.

The digital files are NOT for resale or distribution. Commercial license is only given to active subscribers. If you choose to cancel your subscription, your commercial license will end at the time your access expires.

TheCraftyMaker
TheCraftyMaker

Anycubic Mega Zero 2.0 Front V-Slot Cover

by
TheCraftyMaker
TheCraftyMaker
TheCraftyMaker
TheCraftyMaker
|
Image 1 of 11
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
TheCraftyMaker
TheCraftyMaker
|
Image 1 of 11
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
2D
3D
Makes
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model
Anycubic Mega Zero 2.0 Front V-Slot Cover 3d model

Anycubic Mega Zero 2.0 Front V-Slot Cover

The part needs to be printed diagonally on the bed because the length exceeds the width of the bed.

I've also used a brim because the ends have a tendency to curl up.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.


1 Likes5 DownloadsFebruary 20, 2023
This model is restricted by licensing terms.